Aluminum sheet is almost always alloyed, which markedly improves its mechanical properties, especially when tempered. For example, the common aluminum foils and beverage cans are alloys of 92% to 99% aluminum. The main alloying agents are copper, zinc, magnesium, manganese, silicon and the levels of these other metals are in the range of a few percent by weight. 
 

1050/1060/1100 Material Introduction

1000 serious aluminum plate sheet for industrial pure aluminum, aluminum content (mass fraction) of 99%, non heat treatment. It has high corrosion resistance, electrical conductivity and thermal conductivity, low density, good plasticity, and can be used to produce all kinds of aluminum, but the strength is low. Other processes are basically the same as 1050A. 1100 aluminum sheet commonly used to have good machining performance, high corrosion resistance, high strength does not need not see, such as video and chemical handling and storage equipment, sheet metal products, hardware, hollow spinning drawing goods welding key combination, reflector, nameplate.

Final product: Cooking utensils, building materials, heat exchanger, etc.

 

5005 Material Introduction

5005 aluminum sheet is magnesium aluminum alloy plate sheet and the strength of the equivalent of 3003, welding, good work-ability, the aluminum alloy is similar to the 3003, with medium strength and good corrosion resistance. The anodic oxide film of 5005 aluminum sheet is brighter than the 3003 alloy, and is consistent with the tone of the 6063 alloy.

Final product: Cookware, instrument shell, building decoration, high end curtain wall board, etc..

5052  Material Introduction

5052 Aluminum Alloy plate sheet belongs to Al-Mg alloy, cold forming has good processing performance, processing performance, good corrosion resistance, rust proof aluminum alloy 5052 is a most widely used, this alloy has high strength, especially the anti fatigue strength, ductility and high corrosion resistance, in the semi cold hard plastic is good, do not 5052 alloy used for the internal pressure of the beverage cover, the status of H19 material, do first oxidation treatment to improve coating adhesion and corrosion resistance, both sides painted after the tank cover forming processing, my company production of 5052 alloy lid material with good surface quality, stable performance.

Final usage:Aluminum plate for oxidation, marine sheet metal parts, chemical oil storage device

5454 Material Introduction

5454 aluminum plate sheet anti rust aluminum strength than 5052 aluminum plate is 20% higher, its characteristics roughly the same with 5154, but in the harsh environment corrosion resistance is better than 5154.

Final Usage: Pressure vessel, marine installation pipeline, automobile wheel, oil tank, etc.

5754 Material Introduction

5754 aluminum alloy plate sheet with moderate strength, excellent processing performance, good corrosion resistance, weldability and easy processing characteristics, is a typical alloy of Al Mg alloy. 5754 Aluminum Alloy plates sheets of different heat treatment condition is the automobile manufacturing industry (car door, mould, seals), main materials used for canning industry.

Final Usage:Railway passenger car inside and outside the wall, floor, car plate, etc.
5083 5086 5754 5454 H32 H111 H112 H116 H321 Aluminum coil roll

5083 Material Introduction

5083 aluminum plate sheet belong to Al-Mg-Si alloy, the use of a wide range of. The application of 5083 aluminum plate belongs to the high-end field of aluminum processing industry. With the rapid development of domestic rail transit market and the arrival of the era of globalization, it has a huge market prospect. According to the market development of 5083 aluminum sheet and the demand of the light weight, the production of aluminum alloy sheet was increased, and the production process of aluminum alloy sheet was strictly controlled by 5083 aluminum alloy. Sure, the alloy casting process optimization, homogenization heat treatment and rolling, the 5083 ship Haomei with aluminum performance with foreign materials, to meet user requirements, especially to meet the increasing demand of aluminum processing, rail transportation, high-grade car complex parts such as marine, very broad prospects for application.

Final product:

The outer plate, the bottom of the ship deck, welding   plane plate, a tanker,  oxygen generator  tower etc.

5086 Material Introduction

Aluminum magnesium alloy and aluminum manganese alloy called antirust aluminum alloy components, because the two have increased their anti-corrosion properties, aluminum manganese alloy is 3003,3004,3105, aluminum magnesium alloy were 5005, 5252, 5251, 5050, 5052, 5754, 5083, 5056, 5086 aluminum plate and so on according to the level of the content of magnesium alloy.

Final usage:Aircraft panels can be welded parts, refrigeration equipment, television tower, equipment, transportation equipment, etc.
5083 5086 5754 5454 H32 H111 H112 H116 H321 Aluminum coil roll

5182 Material Introduction

5182 aluminum plate sheet belongs to Al-Mg-Si alloy, a wide range of applications, especially in the construction industry can not be separated from this alloy, is the most promising alloy. Good corrosion resistance, good weldability, good cold workability and medium strength. The main alloying elements for 5182 mg, and added a small amount of silicon, so the welding of 5182 aluminum sheet used in gas welding, argon arc welding, spot welding and seam welding performance are good.

Final Usage:The outer plate, the bottom side of the deck, refrigeration equipment, tanker, oxygen generator tower body



Other Specification

Standard: ASTM B209

Grade:

1XXX: 1050, 1060, 1070, 1100,1230 .

2XXX: 2014, 2024,2124, 2219.

3XXX: 3003, 3004,3005,3105.

4XXX: 4043

5XXX: 5005,5010,5050, 5052,5059,5083, 5086,5154,5252,5454,5754

6XXX: 6003,6061,6063,6082

7XXX: 7050,7075

8XXX: 8011,8079

Temper: O, H12, H14, H16, H18, H20,H22,H24,H26,H28,H32,H34,H36,H111,H112,H114,H116,H321,

F, T3,T4,T6,T651 etc.

 

Popular Size:

Popular Grade & Temper:

1050 H14 / 1060 H24 / 1100 H24

3003 H14 / 3105 H22

5005 H14 / 5052 H32 / 5083 H321 / 5754 H114

6061 / 6063 / 7075 T6 / T651 

Thickness: 0.2mm to 660mm

Width: 600mm to 2600mm (cold rolled), 1000mm to 4300mm (hot rolled)

Length: 600mm to 12000mm 

Popular Size: 

4 X 8 FT, 4 X 10 FT, 5 X 10 FT, 5 X 20 FT etc.

1000X2000MM,1200X2400MM,1220X2440MM,1250X2500MM,1500X3000MM.

Finish: matt, bright, mirror,color coating, hairline, satin, etching, perforated,checkered etc.
5083 5086 5754 5454 H32 H111 H112 H116 H321 Aluminum coil roll

Other Common Specification

 

5083 5086 5754 5454 H32 H111 H112 H116 H321 Aluminum coil roll

Products Show















Aluminum Sheet











Customer Photo





The reason why you choose Tianjin TEDA Ganghua
ISO&SGS&BV Audited company
Advanced production line and inspection equipment
Finished Product Inventory: More Than 800 Tons.
Prompt delivery from stock.
Convenient transportation
We can offer competitive price with best quality&service
More than 15 years export experience
More than 30 years industry experience
More than 100 countries worldwide customers

If you are interested in our products, pls feel free to contact us, we will try our best to support Our business, expect our cooperation chance.
5083 5086 H321 H116 H112 H111 Aluminum sheet plate