Detailed Product Description
1,Good cost performance: Adopting full hydraulic transmission, it can bring the power of engine into full play amply. Adjust the output torque automatically according to loads change, and it can achieve continuously variable transmission. It enables the loader working efficiency and easy maintenance
2,High productivity: Perfectly designed to enable the machine have super lifting force and automatic leveling at high position.
3,Good capability in climbing the slope: 4-wheel driven, strong driving power.
4,Operation flexible: Center-point frame articulated and small turning radius makes it convenient to work in confined places.
5,Safe and reliable: Single-line air-assisted brake system.
6,Going-through capability: The rear axle can swing around the center hanger frame, improved the going-through capability of the whole machine.
7,Operation comfort: Continuously variable transmission, full hydraulic steering system steady and reliable .
ZL18 wheel loader is a newly developed product of our factory in the latest years.
It is the sdc machine which can carry out the operation both forward and rear position. no only has the loader function and can digging.
Used for material loading, unloading, transporting and piling. Used for ground leveling. water pipe, oil pipe and cable laying.
ZL18
WHEEL LOADER
Main Specifications
| Rated capacity for buckket | m3 | 1 |
| Rated Loading | kg | 1800 |
| Break out force | kN | 45 |
| Maximum tractive effort | kN | 38 |
| Tipping load | kN | 30 |
| Travel speed | km/h | |
| Travel speed in forward 1 | km/h | 0-11 |
| Travel speed in forward 2 | km/h | 0-27 |
| Travel speed in reverse 1 | km/h | 0-11 |
| Travel speed in reverse 2 | km/h | 0-27 |
| Dump height | mm | 2600(2900) |
| Reach fully raisde | mm | 930 |
| Dump angle | o | 45 |
| Reach fully raesed | o | 50 |
| Raising time for bucket | s | 5.2 |
| Lowering time for bucket | s | 3.4 |
| Engine model | | 4102BG |
| 4102GB |
| Engine rated powerx | kw | 50 |
| Engine rated revolutions per minute | r/min | 2400 |
| Maxinum articute angle | o | 35 |
| Maxinum climbing capacity | % | 60 |
| Minimum turning radius,with bucket in carry position | mm | 4700 |
| Operating mass | kg | 5700 |
| Ocerall dimension (L*W*H) | mm | 4957*1950*2654
(5334*1950*2654) |
Shipping, Delivery & Maintenance
| Loading (1*40HC') | 2 complete units |
| Delivery time | 4 weeks after confirmation of the order |
| Maintenance |
| The site should be cleaned after work every day, kept lubricated at all points where grease caps have been provided every week.The Engine oil is suggested to be changed every 70 operating hours. |
Web: www.topallmachinery.fr
http://topmac.en.made-in-china.com
Mobile: 13913404508