17t 160K Constrution Equipment 215HP Motor Grader

China 17t 160K Constrution Equipment 215HP Motor Grader, Find details about China Motor Grader, Grader from 17t 160K Constrution Equipment 215HP Motor Grader

Model NO.
Motor Grader
Dimension(Lxwxh)
8970X2625X3470mm
Blade Cutting Angle
28-70degree
Working Hydraulic Pressure
20MPa
Max. Gradeability
20%
Travelling Speed ,Forward
5, 8, 13, 20, 30, 42km/H
Rated Power/Speed
147/2000kw/Rpm
Trademark
Super-above
Transport Package
Roro
Specification
CE
Origin
Jiangsu, China
HS Code
8705109100
Model NO.
Motor Grader
Dimension(Lxwxh)
8970X2625X3470mm
Blade Cutting Angle
28-70degree
Working Hydraulic Pressure
20MPa
Max. Gradeability
20%
Travelling Speed ,Forward
5, 8, 13, 20, 30, 42km/H
Rated Power/Speed
147/2000kw/Rpm
Trademark
Super-above
Transport Package
Roro
Specification
CE
Origin
Jiangsu, China
HS Code
8705109100

215hp GR215 motor grader for sale Introduction

1.The GR215 AVII motor grader adopts Dongkang 6CTA8.3-C215 turbocharged diesel engine with large output torque and power reserve coefficient and low fuel consumption.
2.The gearbox and torque converter are 6WG200 electronically controlled power shift and fixed shaft transmissions produced by Liuzhou ZF. The torque converter has a large torque coefficient, high efficiency, and a wide range of high efficiency. It has good joint performance with engine matching.
3.The drive axle is the Meritor post-production axle.
4.Rear axle main drive is equipped with "NO-SPIN" without self-locking differential.
5.The front steering of the machine adopts a load-sensing full hydraulic steering device.
17t 160K Constrution Equipment 215HP Motor Grader

Specifications of motor grader

Basic specification
Engine model6CTAA8.3 6CTA8.3
Rated power/speed  153kW/2200rpm  160kW/2200rpm
Dimension(LxWxH)8970×2625×3470mm
Operating weight(Standard)16500kg
Performance specification
Travelling speed ,forward5,8,11,19,23,38 km/h
Travelling speed ,reverse5,11,23 km/h
Tractive force(f=0.75)82KN
Max. gradeability20%
Tire inflation pressure260 kPa
Working hydraulic pressure16 MPa
Transmission pressure1.3~1.8MPa
Operating specification
Max. steering angle of front wheels±50°
Max. lean angle of front wheels±17°
Max. oscillation angle of front axle±15°
Max. oscillation angle of balance box15
Frame articulation angle±27°
Min. turning radius using articulation7.3m
Biade
Maximum lift above ground450mm
Maximum depth of cutting500mm
Maximum blade position angle90°
Blade cutting angle28°-70°
Circle reversing rotation360°
Moldboard width X height4270×610mm

17t 160K Constrution Equipment 215HP Motor Grader
17t 160K Constrution Equipment 215HP Motor Grader

17t 160K Constrution Equipment 215HP Motor Grader
17t 160K Constrution Equipment 215HP Motor Grader
17t 160K Constrution Equipment 215HP Motor Grader
17t 160K Constrution Equipment 215HP Motor Grader
17t 160K Constrution Equipment 215HP Motor Grader

If you want to get more details, pls feel free to contact us.