joint hidden roofing sheet roll forming machine
Technical parameters:

Model number:DX 820 JCH Roof Tile Forming Machine|Roll Former Machinery Rolled material:0.3-0.8mm thickness, aluminium sheet, galvanized sheet, colored steel sheet and various steel plates
Effective width:820mm
Feeding width:1000mm
Forming steps:19
Roller:45# forged steel, hard chrome plating within 0.05mm
Diameter of shaft:75mm
Main frame:300H steel
Main motor power:4 kw
Pump power:3 kw
Medium plate thickness:14mm
Sprocket chain: 1 inch
Drive type:by chain
Cutting Blade:Cr12,
heat treatment :60-62°C
Frequency Converter It has the advantage of slowing down before cutting, to ensure the length accuracy (±1mm, far better than industrial standard ±3mm).

Many kinds of join-hidden roof panel sheet profiles avaiolable
 
 
 
4.  The structure of machine
1 set of manual decoiler
Un-powered;
Single head; 
Max. Capacity: 5000kg; 
Coil inner-diameter: 508mm 
1 set of main roll forming machines
Steps: 19
Roller Material: 45# steel 
Voltage: 380V/50Hz.
Line speed: 12m/min; 
Rolling chromium thickness: 0.05 mm 
1 set of computer control cabinet
It adopts Taida PLC to control. The target piece length is adjustable and digit of it can be adjusted.  
5.7 inch touch screen, easy to operate
Computed mode has two modes: Automatic and manual one. 
1 set of hydraulic System 
It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank, the pump drive the cutter machine to begin the cutting job. 
Match equipment: A set of hydraulic tank, a set of hydraulic oil pump, two hydraulic pipes and two sets of electromagnetism valves. 
Power of the oil pump: 3kw Hydraulic oil: 40# 
1 set of cutting mechanism 
It adopts hydraulic drive and automatic location to decide the dimention and cut the target products. 
Match equipment: One set of cutting tool, one hydraulic tank, one cutter machine. 
Stop to cut, Post cut cutting length tolerance: ± 2mm 
Cutting tool material: GCr12 with quenched treatment 60-62° C 
1 set of counter
One counter gauges length, pulses, and decides length 
1 set of output table 
It used to load the forming plate







Company Information.

Our enterprise, Cangzhou Dixin Roll Forming Machine Co., Ltd, as the professional and leading manufacturer, can manufacture, design, installation and debug various roll forming machines and metal processing sheet equipments, which produce metal roof wall panel, glazed roof tile, CZ steel  purlin, floor decking, roof ridge cap, sandwich panel, roof truss, shutter panel, shutter slat, door frame, guardrail, and metal sheet uncoiler, bending, slitting, cutting, flattening, punching, crimping.
 
Backed by reasonable design, precision machining and selected material, both our standard and customized machines are characterized by long life span, precise forming and easy operation. With our customers' trust, our machines have been sent to America, Australia, Russia, India, Sri Lanka, Nigeria, Pakistan, Uzbekistan, Mozambique, Angola, Turkey, Brazil, etc.
 
Warmly welcome to China to visit our factory!