Products

Pool Water Treatment Clo2 Generator 10 Gram Per Hour
Pool Water Treatment Clo2 Generator 10 Gram Per Hour

Pool Water Treatment Clo2 Generator 10 Gram Per Hour

China Pool Water Treatment Clo2 Generator 10 Gram Per Hour, Find details about China Chlorine Dioxide, Chlorine Dioxide Generator from Pool Water Treatment Clo2 Generator 10 Gram Per Hour

Model NO.
CPF-30CX-10D2
Trademark
Waterman
Specification
10 gram per hour
Origin
Made in China
HS Code
8419200000
Model NO.
CPF-30CX-10D2
Trademark
Waterman
Specification
10 gram per hour
Origin
Made in China
HS Code
8419200000

Pool Water Treatment Clo2 Generator 10 Gram Per Hour
Place of Origin: Jiangsu, China (Mainland)
Model: CPF-30CX-10D2
Certification: ISO9001, CE Marked
EINECS No. 233-162-8
CAS NO. 10049-04-4
Control Mode: Manual / linkage / Residual ClO2 Auto-control
Installation Method: Wall-mounted or vertical
Power Supply: 220V/50Hz
Pool Water Treatment Clo2 Generator 10 Gram Per Hour
Main parameters:1. Operating voltage: AC220V plus or minus 10%2. Working temperature: -5 ~ 50 degrees Celsius3. Relative humidity: 80%4. Maximum pressure of water-pipe-line: <0.7Mpa5. There should be no strong electromagnetic field interference around the equipment.6. Function: Manual / Linkage                     Residual ClO2 auto-control                     Low liquid level alarm function
                    Timing start / stop function
                    Alarm remote transfer
Pool Water Treatment Clo2 Generator 10 Gram Per Hour
5 NaClO2 + 4HCl = 4ClO2 + 5NaCl + 2H2O
NaClO2: industrial sodium chlorite (purity≥78% ) or liquid
Activator: industrial first grade compound hydrochloric acid (purity≥31%) or other weak acid or strong acid
Two raw chemicals of NaClO2 and HCl are to be inhaled into the reactor proportionally by two metering pumps, in which produce quantitative high-purity ClO2 solution, and then to be dosed directly in the water tank or pressured water pipe together with the dilution water.

The highest outlet pressure of ClO2 solution is 0.40Mpa. Raw chemicals conversion rate is higher than 90%. The dosage of ClO2 can be adjusted manually or automatically by receiving 4-20mA signal sent by Flow rate of Residual ClO2 sensor.
 

You Might Also Like