Car OBD II Port Fuel Canbus Reading GPS Tracker with Bluetooth Erro Diagnosis for Tracking Vehicle (TK228- JU )

China Car OBD II Port Fuel Canbus Reading GPS Tracker with Bluetooth Erro Diagnosis for Tracking Vehicle (TK228-JU), Find details about China OBD II Tracker, GPS Vehicle Tracking from Car OBD II Port Fuel Canbus Reading GPS Tracker with Bluetooth Erro Diagnosis for Tracking Vehicle (TK228-JU)

Model NO.
TK228-JU
Driver Behavior
Yes
Erro Diagnosis
Yes
GPS Chipset
U-Blox
Agps
Yes
Trademark
TOPTEN
Transport Package
Neutral Packing
Specification
54.0*51.5*28.5 (mm)
Origin
China
HS Code
8531
Model NO.
TK228-JU
Driver Behavior
Yes
Erro Diagnosis
Yes
GPS Chipset
U-Blox
Agps
Yes
Trademark
TOPTEN
Transport Package
Neutral Packing
Specification
54.0*51.5*28.5 (mm)
Origin
China
HS Code
8531
Car OBD ii port fuel Canbus reading gps tracker with bluetooth erro diagnosis for tracking vehicle (TK228-JU)

TK228 OBD-II GPS Tracker is a multifunctional product. It is an integration of GPS tracking system, RFID car alarm system & OBD-II Diagnostic system. It's plug and play design. Easy to install. 

The device will fetch those important data (speed, rpm, odometer, speed, driver behavior data...etc) via CAN-BUS and send out by GPRS network or by blue-tooth connection. 

It adapts 2.4GHz RFID technology, which can make it work as a simple keyless alarm system with easy installation. In arm status, the following operations will trigger alarm: Engine on, vibration, cut-off power & take-out of the device. The system will send out alarm message with location by SMS/GPRS to your mobile phone or tracking center immediately. 

Features:
1. Plug & play design with OBD-II connector, compatible with all the vehicles with OBD-II connector, supports most CAN-BUS communication protocols;
2. It is the integration of GPS tracker + RFID car alarm + Bluetooth diagnostics;
3. Arm/disarm by SMS/phone call, or by 2.4G RFID tag automatically;
4. Check the real physical address (such as city name, street name.) directly;
5. Track by SMS/website to get the latitude, longitude, speed, direction & odometer etc.;
6. Movement alarm, Over-speed alarm, Geo-fence alarm;
7. Engine on alarm, power failure alarm, vibration alarm;
8. Anti-tamper alarm. Once the device is disconnected, it will trigger the alarm;
9. Built-in shock sensor for power saving & triggering vibration alarm;
10. Monitor the voice;
11. Supports 2.4G long-distance contactless RFID function(optional); 
12. Keyless RFID car alarm function(optional);
13. Accurate odometer & speed reading directly via CAN-BUS;
14. Data logger 8Mb for offline GPS waypoint;
15. Read the vehicle error code & clear the error code ;
16. Built-in rechargeable backup battery; when the car battery is cut off or damaged, the built-in backup battery can work for emergency check, and the system will send out power failure alert immediately.
17. Two kinds of location information; user can check the GPS latitude, longitude, speed, direction. If there is no GPS signal, user could also locate the car by GSM base station code.
18. Remote diagnostics function. Transmission of the following data via blue-tooth or GPRS network:
(1) Battery's voltage, RPM, speed, TAP throttle opening, engine load, coolant temperature, fuel consumption, odometer, error code & times, acceleration times & deceleration times;
(2) Driver behavior data: ignition time, total driving time, total idling time, average engine hot-start time, average speed, history high speed, history RPM, total acceleration times & total deceleration times.

Specifications:

Size of the main unit: 
54.0*51.5*28.5(mm)
Weight of the main unit73G
Inside Backup battery: Rechargeable 3.7V 250mAh Li-ion battery
Working temperature: -20~85 centigrade
Humidity: 0~95%
GSM frequencies: Quad-band: 
2G: 850MHz/1800MHz/1900MHz
3G: 800/850/900/1900/2100MHz
Working frequencies: 1575.42MHz C/A(GPS)
Receiving sensibility: -162dBm
Positioning accuracy: ≤10m(wide-open area)
Speed accuracy: ≤0.1M/S(wide-open area)
Positioning modeAuto 2D/3D
Working voltage: +6.0 ~+45VDC/1.5A
GPS Position time: Cold start: 40 seconds
Warm start: 20 seconds


Car OBD II Port Fuel Canbus Reading GPS Tracker with Bluetooth Erro Diagnosis for Tracking Vehicle (TK228-JU)

GPS Tracking Software: 
Car OBD II Port Fuel Canbus Reading GPS Tracker with Bluetooth Erro Diagnosis for Tracking Vehicle (TK228-JU)
OBD code report: 

Car OBD II Port Fuel Canbus Reading GPS Tracker with Bluetooth Erro Diagnosis for Tracking Vehicle (TK228-JU)
GPS Alarm report: 
Car OBD II Port Fuel Canbus Reading GPS Tracker with Bluetooth Erro Diagnosis for Tracking Vehicle (TK228-JU)



Car OBD II Port Fuel Canbus Reading GPS Tracker with Bluetooth Erro Diagnosis for Tracking Vehicle (TK228-JU)


Q&A:

Q: How does the alarm function work?
A: The device is tracker, alarm and diagnostic tool. If someone tries to tamper vehicle, the device will send alert SMS to owner and send alert to software. 

Q: When does the device send alarm.
A: Device sends alarm when vehicle is being vibrated/moved, engine is started or device is powered off/disconnected illeagally.

Q: Can I add more than one RFID tag to each tracker?
A: Yes.

Q: Does the RFID tag have a battery? How long will it last?
A: Yes the RFID tag has battery inside. It'll last at least 1 year. And it can be easily replaced.

Q: What's the range/distance between the tracker and RFID tag?
A: The range between the tracker and RFID tag is 3 meters to 5 meters.

Q: What are the functions of the RFID tag.
A: The RFID tag has 2 functions.
1. To arm/disarm the OBD unit. When RFID tag get close to the tracker, the tracker will be disarmed automatically. When RFID tag is away from tracker, tracker will be armed automatically.
2. To manage different drivers' information.
Each RFID tag has an ID. Every time the driver bring the tag close to the tracker, and start car, the tag's ID will be sent to platform, so you can know who is driving the vehicle, and how long he has being driving the vehicle.


Car OBD II Port Fuel Canbus Reading GPS Tracker with Bluetooth Erro Diagnosis for Tracking Vehicle (TK228-JU)