China SMD Aluminum Electrolytic Capacitor 105° C, Find details about China Bi-Polar SMD Capacitor, Electrolytic Capacitor 47UF from SMD Aluminum Electrolytic Capacitor 105° C
| Item | Characteristics | ||||||||||||||||
| Operating temperature range | -40 +105° C | ||||||||||||||||
| Rated voltage range | 4V~ 50V | ||||||||||||||||
| NominalCapacitance Range | 0.1-1000uF | ||||||||||||||||
| Nominal Capacitance Tolerance | ±20% (20° C ,120Hz) | ||||||||||||||||
| Leakage Cument | 1≤ 0.01CR VR or 3(uA)Whichever is greater(After 2 minutes' application of rated voltage) CR:Nominal Capacitance(uF) UR:Rated voltages (V):Rated voltages (V) | ||||||||||||||||
| Dissipation Factor(Max) | UR(V) | 4 | 6.3 | 10 | 16 | 25 | 35 | 50 | |||||||||
| tg | 0.35 | 0.28 | 0.24 | 0.20 | 0.16 | 0.14 | 0.12 | ||||||||||
| Load Life | After 1000 hours' application of rated voltage at 105 ,the capacitor shall meet the following requirement. | ||||||||||||||||
| Capacitance Change | Wi thin ±20% of the initial value ( 16V:within 25 of the initinal value) | ||||||||||||||||
| Dissipation Factor | Not m ore than 300% of the initial specified value | ||||||||||||||||
| Leakage Cument | Not more than the initial specified value | ||||||||||||||||
| Shelf Life | After storage for 1000 hours +105 , the capacitors shall meet the requirement of load life above | ||||||||||||||||
| Low Temperature Stability Impedance Ratio(120Hz) | UR(V) | 4 | 6.3 | 10 | 16 | 25 | 35 | 50 | |||||||||
| Z(-25°C)/ Z(+20° C ) | 7 | 4 | 3 | 2 | 2 | 2 | 2 | ||||||||||
| Z(-240°C)/ Z(+20° C ) | 15 | 8 | 6 | 4 | 4 | 3 | 3 | ||||||||||
| Resistance to Soldering Heat | After reflow soldering according to Reflow Soldering Temperature ,Profile(see page8)and restored at room remperature, they meet the folowing requirement. | ||||||||||||||||
| Capacitance Change | Wi thin ±10% of the initial value | ||||||||||||||||
| Dissipation Factor | Not m ore than the initial specified value | ||||||||||||||||
| Leakage Cument | Not more t | ||||||||||||||||