1.Product Application:



The jaw crusher machine consists of two jaw plates, the dynamic jaw and static jaw.The working part of the jaw crusher is two jaw plates, one is the fixed jaw plate (stationary jaw), the other is the mobile jaw plate (dynamic jaw), the position is inclined, with the fixed jaw plate forms the upper big lower small crushing cavity (working chamber).The movable jaw plate moves periodically to the stationary jaw plate, sometimes apart, sometimes close.When separated, the material enters the crushing chamber and the finished product is discharged from the lower part.When close, the material between two jaw plates is compressed, bent and split.Widely used in mine smelting, building materials, roads, railways, water conservancy and chemical industries and other industries of various ore and bulk material crushing.The maximum compressive strength of the crushed material is 320Mpa.


Working principle :
  When the jaw crusher is working, the movable jaws make periodic reciprocating motions to the fixed jaws, sometimes approaching and sometimes leaving. When approaching, the material is crushed, split, and impacted between the jaws; when it is removed, the broken material is discharged from the discharge opening by gravity. In the process of breaking large stones into small stones, the first crusher is usually a main crusher. The longest and most solid crusher is a jaw crusher. When feeding the jaw crusher, the material is poured from the top inlet into the crushing chamber containing the rake teeth, and the rake teeth force the material against the wall of the chamber and break it into smaller stones. An eccentric shaft is supported for the movement of the caries, and the eccentric shaft penetrates the frame of the fuselage. Eccentric motion is usually generated by flywheels fixed at both ends of the shaft. Flywheels and eccentrically supported bearings often use spherical roller bearings, which must withstand large shock loads, abrasive sewage, and high temperatures.

Details Images:







  Working principle:
 When the jaw crusher is working, the movable jaws make periodic reciprocating motions to the fixed jaws, sometimes approaching and sometimes leaving. When approaching, the material is crushed, split, and impacted between the jaws; when it is removed, the broken material is discharged from the discharge opening by gravity. In the process of breaking large stones into small stones, the first crusher is usually a main crusher. The longest and most solid crusher is a jaw crusher. When feeding the jaw crusher, the material is poured from the top inlet into the crushing chamber containing the rake teeth, and the rake teeth force the material against the wall of the chamber and break it into smaller stones. An eccentric shaft is supported for the movement of the caries, and the eccentric shaft penetrates the frame of the fuselage. Eccentric motion is usually generated by flywheels fixed at both ends of the shaft. Flywheels and eccentrically supported bearings often use spherical roller bearings, which must withstand large shock loads, abrasive sewage, and high temperatures.

Main Features :

(1). This crusher has high reduction ratio and the crushed materials are of the even granularity.
(2). Crushing chamber is deep and has no dead space, which helps improve the feeding capacity and productivity.
(3). Adjustment device of gasket type discharging end is reliable and convenient to use.The discharging end has       wide adjusting range which can increase the flexibility of our equipment.
(4). Lubrication system is safe and reliable.
(5). Accessories are convenient to replace, and little maintenance is needed.

Technical Data:
Our company: