Electrostatic Thermoset powder coating/powder paint

Plastic powder is introduced

Thermosetting powder coating is a kind of environmental protection, high efficiency and high performance products,
known as the "four E"  international products, mainly include the resin, pigments, fillers and additives of several kinds of
chemical raw materials, is non-toxic, tasteless, no stimulation, no pollution of powder coatings
 

Main applications

1, pipes and valves industry: anti-corrosion pipe, oil pipe, sewage pipe, the ship with water pipe, gas pipe and valve parts, etc.

2, metal furniture, steel furniture, filing cabinet, steel chairs, etc.

3, kitchen utensils: liquefied petroleum gas cylinder, gas cookers, the lampblack that take off and so on.

4, construction industry: locks, building steel and steel template,aluminium profile,etc.

5, electrical appliances industry: electronic components, and the insulation of the generator rotor coil packaging.

6, automobile and motorcycle industries: automobile, motorcycle, bicycle and other mechanical and electrical equipment

product series

Main series include: pure epoxy, polyester, epoxy, polyester, acrylic, etc.
Product classification: high gloss (>80%), gloss (>70%), satin (>40%) matte(> 20%),lustreless(<20%)

curing condition

Standard 180 °C (temperature) for 15 minutes 

the coating performance

The inspection index is under standard test items

Bend test (mandrel) ISO1519 by GB/T6742-1986 2mm

Impact resistance of ISO6272 by GB/T1732-1993 45kg/cm

Cupping test ISO1520 GB/T9753-1988 ≥ 4mm

Adhesion (scribe) ISO2409 GB/T9286-1986 ≤1 grade

The pencil hardness of ISO 15184-1998 ≥F

Salt spray test ISO7253 GB/T1771-1991 > 500h

Damp heat test ISO6270 GB/T1740-1979 > 500h

Covering rate theoretically 7-12 square meters / kg at 60um
(film thickness to powder coating, the utilization rate of 100% calculated)
 

Finished product storage requirements

Store below 35 °C, ventilated, dry and clean indoor, shall not be close to the fire and heat, avoid direct sunlight,
Powder under the condition of stable storage for 6-12 months. 
 

Health and safety

The powder coating is a non-toxic products, but should avoid inhaling dust in the use.
Propose operators wear suitable anti-dust masks, glasses.

 Adhering to "Quality,service,innovation,efficiency" opration principle and
 "people-oriented,customer first,accuracy and reality,integrity and honesty" core value,
Fujian Wanan Group consistently insist on customer-oriented,
technology innovation as core,talented people as fundamental,quality product as base,
good culture as guarantee,dedicate to providing one-stop coating solution,persistently create maximum value for customer.