Products

Hammer Silver Texture Sand Steel Powder Coating for Furniture

China Hammer Silver Texture Sand Steel Powder Coating for Furniture, Find details about China Powder Coating, Powder Paint from Hammer Silver Texture Sand Steel Powder Coating for Furniture

Components
Film Forming Matter
Paint Film Property
Antiseptic Paint
Formation Mechanism
Conversion Type
Production Name
Epoxy Polyester Electrostatic Powder Coating
Thickness
60-80um
Adhesion
0 Grade
Hardness
2h
Gloss
High / Semi / Matte Gloss
Expiration
12 Months
Curing
180 Degree/15mins, 200 Degree/10mins
Spraying Mode
High Voltage Electrostatic Spraying 40-80kv
Storage Condition
at About 25 Degree and at Ventilated Indoors
Anti Resistance
500h
Spray Ratio
90%
Air Pressure
Appropriate
Spray Room
Clear, No Other Powder Coating
Electric
25-30mA
Bending Test
5mm
Trademark
Wonder
Transport Package
Lined in with Double PE Bags. Packed in Carton Box
Specification
39.5cm*30cm*35cm.
Origin
Guangdong, China
HS Code
3907999990
Components
Film Forming Matter
Paint Film Property
Antiseptic Paint
Formation Mechanism
Conversion Type
Production Name
Epoxy Polyester Electrostatic Powder Coating
Thickness
60-80um
Adhesion
0 Grade
Hardness
2h
Gloss
High / Semi / Matte Gloss
Expiration
12 Months
Curing
180 Degree/15mins, 200 Degree/10mins
Spraying Mode
High Voltage Electrostatic Spraying 40-80kv
Storage Condition
at About 25 Degree and at Ventilated Indoors
Anti Resistance
500h
Spray Ratio
90%
Air Pressure
Appropriate
Spray Room
Clear, No Other Powder Coating
Electric
25-30mA
Bending Test
5mm
Trademark
Wonder
Transport Package
Lined in with Double PE Bags. Packed in Carton Box
Specification
39.5cm*30cm*35cm.
Origin
Guangdong, China
HS Code
3907999990

Hammer Silver Texture Sand Steel Powder Coating for Furniture


Description
epoxy polyester ral colors powder coating use for indoor/outdoor envirnment, can be use for metal, steel, aluminum products.
It is usually used to create a hard finish that is tougher than conventional paint. Powder coating is mainly used for coating of metals, aluminum extrusions, and automobile and bicycle parts.

The Powder Coating Process involves three basic steps:
 
1.Part preparation or the pre-treatment = Removal of oil, soil, lubrication greases, metal oxides, welding scales etc. is essential prior to the powder coating process. It can be done by a variety of chemical and mechanical methods. The selection of the method depends on the size and the material of the part to be powder coated, the type of soil to be removed and the performance requirement of the finished product.

2.  The powder application - The most common way of applying the powder coating to metal objects is to spray the powder using an electrostatic gun, or corona gun. The gun imparts a positive electric charge on the powder, which is then sprayed towards the grounded object by mechanical or compressed air spraying and then accelerated toward the workpiece by the powerful electrostatic charge.

3.  Curing - When a thermoset powder is exposed to elevated temperature, it begins to melt, flows out, and then chemically reacts to form a higher molecular weight polymer in a network-like structure. This cure process, called crosslinking, requires a certain temperature for a certain length of time in order to reach full cure and establish the full film properties for which the material was designed. Normally the powders cure at 200°C (390°F) for 10 minutes. The curing schedule could vary according to the manufacturer's specifications. The application of energy to the product to be cured can be accomplished by convection cure ovens or infrared cure ovens.
Hammer Silver Texture Sand Steel Powder Coating for FurnitureHammer Silver Texture Sand Steel Powder Coating for FurnitureHammer Silver Texture Sand Steel Powder Coating for FurnitureHammer Silver Texture Sand Steel Powder Coating for FurnitureHammer Silver Texture Sand Steel Powder Coating for FurnitureHammer Silver Texture Sand Steel Powder Coating for Furniture
Product Test
 
Product Details
Typeindoor/outdoor
ColorRAL color
Surface Finishtexture sand
Gloss level 20%
Particle SizeAverage 32-42μm
Specific Gravity1.2-1.7g per cubic meter
Coverage8-10 square meters per Kg at 50-90 μm film thickness
film thickness60-80μm
Application Recommendation
Application Voltage60-90 KV
Gun to Component Distance15-20CM
Curing Temperature200 degree / 10 mins
electric current25-30MA
Spray RoomClear, no other powder coating
Air pressure Appropriate
Powder coated Film Mechanical Properties
AdhesionCross-cut(3mm),no loss of adhesion
Impact ResistanceDirect impact 50kg/cm
Pencil Hardness2H
Cupping Test6mm Mandrel
Bending Test5mm
Powder Coated Film Chemical Resistance
Salt Spray Test5% NaCl Solution for 500 hours - No change
Acid Resistance5% HCL for 48 hours dip test - No change
Alkali Resistance5% NaOH for 48 hours dip test - No change
Powder Coating Advantage
RatioSpray ratio is 90%
Square 1KG of powder coating can spray 8-10 square meter
Adhesive forcePowder Coating adhesive force is stronger 8-10 years
ColorPowder Coating is not easy to fade in 5-8 years
Storage Stability
Store in ventilated, dry, clean room, temperature < 25ºC
Relative humidity 50-65%
Away from direct sunlight, fire, heat
For best performance, use within 6 months


Our factories

1.Production workshop set up in 1989, leading powder coating supplier with rich experience in China.
2. 4 Factories in total. Three are Powder Coating Production Bases, one is Nano-Dryplating Spraying Base.
     16 Production Lines. 5 Bonding Lines. 9 Sample Lines.
     Annual Capacity reaches 10,000 Tons.
  3. Nano-Dryplating Silver Chrome Effect Powder Coating is identified as Guangdong High-Tech Product.
 4. Oversea Countries: Sweden, Turkey, Russia, Guatemala, Peru, Pakistan, UAE, etc

Hammer Silver Texture Sand Steel Powder Coating for Furniture
Certificate
Hammer Silver Texture Sand Steel Powder Coating for Furniture

FAQ

Q1. Can I have a sample order for powder coating?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?
A: Sample needs 3-5 days, mass production time needs 1-2 weeks for inspection and customs declaration.

Q3. Do you have any MOQ limit for powder coating?
A: Low MOQ, 1-2kg sample powder checking is available.

Q4. How to proceed an order for powder coating?
A: Firstly let us know your requirements or application.
    Secondly We quote according to your requirements or our suggestions.
    Thirdly customer confirms the samples and places deposit for order.
    Fourthly We arrange the production.

Q5: Do you offer guarantee for the products?
A: Yes, we offer professional after-sale service for every customer.

Welcome to contact us
Judy
 

 
 
 
 
 
 







 

You Might Also Like