Products

Carbon Monoxide Low Temperature Converter Shift Catalyst

China Carbon Monoxide Low Temperature Converter Shift Catalyst, Find details about China Catalyst, Carbon Monoxide from Carbon Monoxide Low Temperature Converter Shift Catalyst

Model NO.
MS
Effect
Reduce Cost
Source
Particle
Application
Carbon Monoxide Low Temperature Converter Shift
Trademark
Mingshuo
Transport Package
Standard Export Packing
Specification
Customized
Origin
China
Model NO.
MS
Effect
Reduce Cost
Source
Particle
Application
Carbon Monoxide Low Temperature Converter Shift
Trademark
Mingshuo
Transport Package
Standard Export Packing
Specification
Customized
Origin
China
CO Low Temperature Shift Converter Catalyst

1. Introduction:
MS208 type low temperature shift catalyst is widely used in the carbon monoxide shift reaction in the hydrogen production, ammonia production and methanol synthesis process of coal, petroleum gas, natural gas, coke oven gas, acetylene tail gas and calcium carbide tail gas. It can reduce carbon monoxide by about 3% to less than 0.3%.

The reaction equation is as follows: CO+H2O=CO2 +H2 (reversible reaction) △H 0 298 =-41.1KJ/mol

2. Physical and chemical properties:
ItemSpecifications
AppearanceBlack cylinder with metallic luster
Sizeφ5.0mm × 4.5 ± 0.5 mm
Bulk density1.4 ±~0.02g/ml
Specific surface area60~80m2 /g
Chemical compositionCuO, ZnO, Al2O3, Auxiliaries

3. Catalyst quality standard: HG/T3556-2012
ItemUnitTechnical index
Activity after heat resistance ≥%90
Radial crushing strength of particles before reduction ≥N/cm180
Percentage of particles with strength less than 110 N/cm ≤%10.0

4. Operating conditions:
ItemParameters
Operating temperature range160~260ºC
Normal operating temperature180~240ºC
Operating pressureAtmospheric pressure~5.0MPa
Space velocity1000~4000h -1 (varies with pressure)
H2 O/C4~6
Raw material gas hydrogen sulfide content:≤ 0.1ppm
Raw material gas chlorine content≤ 0.01ppm
Carbon Monoxide Low Temperature Converter Shift Catalyst
5. Main performance and characteristics:
Good activity: 
MS208 catalyst adopts a new production process, which increases the dispersibility of the active ingredient CuO, increases the surface area of the effective copper, and therefore has better activity.
High compressive strength:
The actual use of the user shows that the MS208 low-shift catalyst has the characteristics of high strength, not easy to pulverize, and long service life. The strength of the catalyst before reduction is generally above 200N/cm, and the strength basically does not decrease after reduction.
Low steam consumption: 
MS208 low-temperature shift catalyst is a new generation based on the previous catalyst, jointly developed by our company with Chinese well-known institutions. In the actual production process, space velocity is large, output is high and the steam consumption is low.
Good thermal stability and anti-toxic performance: 
Practical results from many manufacturers show that MS208 low temperature shift catalyst has strong thermal stability and anti-toxicity.

Carbon Monoxide Low Temperature Converter Shift Catalyst

You Might Also Like