Jc-C01 Ceramic Pressure Sensor

China Jc-C01 Ceramic Pressure Sensor, Find details about China Sensor, Ceramic Pressure Sensor from Jc-C01 Ceramic Pressure Sensor

Model NO.
JC-C01
Measuring Medium
Gas Liquid Steam
IP Rating
IP68
Certification
CE
Customized
Customized
Pressure Range
100kpa ~60MPa
Dimensions
18X5.25mm
Power Supply
5~ 30V DC
Bridge Impedance
11KΩ±20%
Response Time
< 1ms
Accuracy
0.2 ~ 0.4 Fs%
Zero Drift
±0.2mv/V
Insulation Resistance
>2kv
Output of Full Scale
2.0 ~4.8mv/V
Operating Temperature
-40~125 °c
Trademark
Jiucheng
Transport Package
Standard Exporting Carton
Specification
18x6.35mm
Origin
Nanjing, China
Model NO.
JC-C01
Measuring Medium
Gas Liquid Steam
IP Rating
IP68
Certification
CE
Customized
Customized
Pressure Range
100kpa ~60MPa
Dimensions
18X5.25mm
Power Supply
5~ 30V DC
Bridge Impedance
11KΩ±20%
Response Time
< 1ms
Accuracy
0.2 ~ 0.4 Fs%
Zero Drift
±0.2mv/V
Insulation Resistance
>2kv
Output of Full Scale
2.0 ~4.8mv/V
Operating Temperature
-40~125 °c
Trademark
Jiucheng
Transport Package
Standard Exporting Carton
Specification
18x6.35mm
Origin
Nanjing, China
Jc-C01 Ceramic Pressure Sensor

JC-C01 Ceramic Pressure Sensor
Intruduction:

JC-C01 ceramic pressure sensors are made with a ceramic base plate and a flush diaphragm and work following the piezoresistive principle.  
The Wheatstone bridge is screen printed on one side of the flush ceramic diaphragm which is, in turn, glued to the sensor's body. The bridge faces the inside where a cavity is made and the diaphragm's opposite side can therefore be exposed directly to the medium to be measured.
Because of the Al2O3 ceramic excellent chemical resistance (aggressive gases, most of solvents and acids, etc.), no additional protection is normally required. JC-C01 sensors are thermally compensated by laser-adjustable PTC resistors and the use of ceramic ensures a high linearity across the entire range of measurement, reducing effects of hysteresis to a minimum. 

JC-C01 Ceramic Pressure Sensor Features:
* Sturdy ceramic sensitive diaphragm 
* Zero point, full-scale laser calibration 
* Excellent corrosion resistance and wear resistance 
* Anti-impact, anti-vibration 
* High precision, high stability 
* Wide operating temperature range 
* Small size, easy to package
Jc-C01 Ceramic Pressure Sensor


Jc-C01 Ceramic Pressure Sensor
Jc-C01 Ceramic Pressure Sensor


Technical Parameters:
Jc-C01 Ceramic Pressure Sensor

 Ordering information:
Jc-C01 Ceramic Pressure Sensor
Note: 
1. Different batches of products may have different printing colors
2. Can be used for down-range and the amplitude is controlled within ±50%FS.
3. The maximum pressure of the system should be less than the overload protection limit of the sensor, otherwise it will affect the service life of the product and damage the product.
4. Do not force to pull the pins or the leads of sensitive components.
5. Protect the isolation diaphragm at the front end of the pressure sensitive component to prevent the impact of the pressure sensitive component from damaging the sensitive component.
6. If you have special requirements on product performance parameters and functions, please contact us.

Jc-C01 Ceramic Pressure Sensor

About Jiucheng
Jc-C01 Ceramic Pressure Sensor

Qualification and Certificate:
Jc-C01 Ceramic Pressure Sensor

Jc-C01 Ceramic Pressure Sensor


Product Packaging:
We choose cartons and protective pads that can be recycled. This will maximize the protection of our products from damage during transportation.
Jc-C01 Ceramic Pressure Sensor

Product Transportation:
We only choose the global express service providers. We will deliver the goods to you at the most efficient speed.
Jc-C01 Ceramic Pressure Sensor