HM-818 is positioning adhesive especially designed for breathable films of sanitary napkins and panty 
liners. HM-818 has characteristics of good liquidity, strong adhesion force on PE films, proper bonding strength 
after setting, no transfer, good cold-resistance and great aging-resistance.

Technical Data
Composition: Synthetic Resins
Appearance: Colorless transparent block solid
Toxicity: None
R&B softening point: approx. 96°C
Brookfield viscosity: 125ºC-------about 15000 mps 
150ºC-------about 5500 mps 
175ºC-------about 2400 mps
200ºC-------about 1050 mps
Density: 0.97 g /cm3 @ 25ºC

Application Instructions
Its adhesion performance will be affected by substrates, release paper and application environment, so 
trial run is necessary to determine whether the adhesive is suitable.
There should be no dust or oil on the surface of substrates and release paper, also the substrates and 
release paper should be treated to constant temperature and humidity before application.
Recommended application temperature:150-175ºC
Recommended coating weight:25-45gsm
Application methods: slot or Fine line

Packaging and Storage
Shelf Life: 12 Months in dry and cool environment
Packaging: 20Kg/carton, about 1Kg/cake, wrapped with fusible films

Cleaning:
The residual adhesive can be rubbed off by wooden shovel before it is totally cooled. Cooled glue can be 
cleaned with specialized detergent. Applicators can be cleaned with mineral oil at 120ºC, then purged with hot 
melt adhesive. 

Warnings:
Don't mix the product with other adhesives.
Keep the adhesive containers covered to avoid dust or contamination.
Use it with adequate ventilation to remove any hot melt fumes or vapors that are generated
Wear safety glasses, safety gloves and safety clothes when using hot melt adhesive to avoid scald.