1200W Diode Laser Hair Removal Machine 808nm Laser Hair Loss Beauty Machine

China 1200W Diode Laser Hair Removal Machine 808nm Laser Hair Loss Beauty Machine, Find details about China Laser Hair Removal Machine, 808 Diode Laser Hair Removal Machine from 1200W Diode Laser Hair Removal Machine 808nm Laser Hair Loss Beauty Machine

Model NO.
BR315
Frequency
1-10Hz
N.W
25kgs
G.W
36kgs
Spot Size
10*12mm2
Pulse Width
10-200ms
Energy Density
0-150j/Cm2
Input Power
1200W
Tem
0-40 Degree
Handle with 6 Bar
350W
Package Size
106*45*46cm
Mode
Single Pulse and Cont Pulse
Cooling System
Watercooling+Wind Cooling+Semiconductor
Trademark
BEIR
Transport Package
Wooden Case
Specification
Machine case: ABS
Origin
Guangzhou
HS Code
90189090
Model NO.
BR315
Frequency
1-10Hz
N.W
25kgs
G.W
36kgs
Spot Size
10*12mm2
Pulse Width
10-200ms
Energy Density
0-150j/Cm2
Input Power
1200W
Tem
0-40 Degree
Handle with 6 Bar
350W
Package Size
106*45*46cm
Mode
Single Pulse and Cont Pulse
Cooling System
Watercooling+Wind Cooling+Semiconductor
Trademark
BEIR
Transport Package
Wooden Case
Specification
Machine case: ABS
Origin
Guangzhou
HS Code
90189090
10000000 shots 808nm diode hair removal laser
Working Principle

808nm Diode hair removal machine is freezing through technological innovation, so that the treatment of headto negative temperature, unlike other laser burns the skin, to better protect the skin, hair follicle melanin byspecific wavelength of laser absorption, and the heat exchange to destroy hair follicle, the laser energy canbe shot down into the hair follicles within the hair follicle is destroyed energy decomposition, so that the hairfollicles to stop growing, because the laser energy about 15% of the skin can penetrate the dermis layer, theepidermis and more with melanoma of the hair follicle deep through the heat damage to hair follicle degeneration and atrophy; achieve permanent hair removal results.
3 process of hair removal as follows
origiral hair--penetrate into the dermis layer--destroy hair follicles

1200W Diode Laser Hair Removal Machine 808nm Laser Hair Loss Beauty Machine
Features
With Sapphire Crystal on the treatment head that can be used forever without replacement;
Powerful semiconductor cooling, air cooling and water cooling can ensure longer working time.
Water cycle& water temperature checking system and powerful abstractor extend the service life and safety for the machine;
Short treatment time and quick recovery have little effect on patients' daily work.
Advanced flash computer calculater: xenon lamp computer calculater system always show how many flashes you have used.
Easier installation: plug-and-play connectors.
Minimum energy loss: ceramic silver-gilt lumen refelcts diffuse light onto laser rod to produce stronger power


Application
Permanent hair removal of all colors.
Remove unwanted hair on all parts of body.
Hair removal of  hairline, lip, whiskers, armpit; body hair and bikini hair removal.

Machine advantages
Fast speed, painless
Works with all skin type
The high average power, low fluence, and high repetition rate, so that the energy is delivered safely for all skin types.
No harm, no side effect.
Less down time, lasting results
Pain free and comfortable
Slowly increase the temperature by constantly moving the handpiece during treatment, the
energy is delivered uniformly, and the patient feel comfortable.
Short treatment
Enables you to treat in only 15-20 minutes.
Friendly software operation
Easy to operate, safety protection
1200W Diode Laser Hair Removal Machine 808nm Laser Hair Loss Beauty Machine


Product show
1200W Diode Laser Hair Removal Machine 808nm Laser Hair Loss Beauty Machine

1200W Diode Laser Hair Removal Machine 808nm Laser Hair Loss Beauty Machine1200W Diode Laser Hair Removal Machine 808nm Laser Hair Loss Beauty Machine

 Handles show
germany laser bars
10 millions shots
808nm wavelength
1200W for machine 
Handles with 6 bar:350W

1200W Diode Laser Hair Removal Machine 808nm Laser Hair Loss Beauty Machine
1200W Diode Laser Hair Removal Machine 808nm Laser Hair Loss Beauty Machine
Product technical parameters 
1200W Diode Laser Hair Removal Machine 808nm Laser Hair Loss Beauty Machine
The operation interface
English as default language
3 modes for option,usually use fast mode.
1200W Diode Laser Hair Removal Machine 808nm Laser Hair Loss Beauty Machine

FAST MODE:it is FHR (Fast hair removal) mode, this mode is suitable for public treatment, easy to start a treatment, most popular with beautician in beauty salon, spa centers, etc
NORMAL MODE:it is standard hair removal mode, according to the different individual to have a targeted treatment, designed for doctor and professional trained operator use in medical clinic, surgical hospital, etc
Skin Rejuvenation:it is a additional function of skin rejuvenation with low energy shooting to make face smooth, tender and younger.
the power of FHR mode is adjustable from 5-10J/cm2;we recommend start from 5J,then add the power slowly according client's feelings.
accoring the feeling.

the water cooling is default "on" after device running
Cooling on:the water cooling is default "on" after device running
Counter:show current shooting numbers of hand-piece, automatically be cleared at next entry.


NORMAL MODE:
the power changes from 6-50J/cm2
Pulse:pulse means pulse width, changes from 80-200m
Frequency:the frequency changes from 1-5Hz
Cooling on:the water cooling is default "on" after device running
Counter:show current shooting numbers of hand-piece, automatically be cleared at next entry.


Treatment parameter is adjusted by following principles:
Pulse width at 80ms:
Power from 6-20J/cm2 adjustable;
Frequency from 1-5Hz adjustable;

Pulse width at 120ms:
Power from 6-30J/cm2 adjustable;
Frequency from 1-3Hz adjustable;

Pulse width at 160ms:
Power from 8-40J/cm2 adjustable;
Frequency from 1-2Hz adjustable

Pulse width at 200ms:
Power from 10-50J/cm2 adjustable;
Frequency from 1-2Hz adjustable;
Power and Frequency will change based on different pulse width

Skin rejuvenation screen:
At skin rejuvenation screen, it is additional function for face rejuvenation and easy to set parameter: adjust power---press "start"--system becomes to "STOP"and shows "system is ready" at screen bottom---press "button" on hand-piece to start a face treatment.
Power:set power from 1-5/cm2 adjustable;
Cooling:the water cooling is default "on" after device running;
Counter:show current shooting numbers of hand-piece, automatically be cleared at next entry.
Cautions: At each treatment function, the cooling is default "ON", PLEASE DO NOT CLOSE IT IN ORDER TO SYSTEM NORMAL WORKING!
Therapy steps:
1.Before do treatment, clean and disinfect the treatment area
2: Shaving hair away:

For better energy transmit to skin, need to shave the exposed hair away
3.Daub cooling gel:

Cooling gel can reduce discomfort during treatment, so before start treatment daub proper cooling gel onto treatment area (normal 2mm thickness)
4.Set parameters for device:
Gradually set pulse width and corresponding power, frequency to achieve the best user experience
5. Hair depilation:
The method to do hair depliation: the hand-piece (sapphire) is stick to skin tightly, and sliding 6-7 times back and forth; during this treatment, observe the changes of skin: if skin no obvious changes,need to increase power until user feels hot and the skin on treatment area appears flushed.
6.Cleaning and Ice compress:
After do treatment, clean again the treatment area, and do ice compress to partial skin for 10-15 minutes if needed; for device, return to menu from treatment screen, turn off device with key switch and clean the sapphire with tissue

1200W Diode Laser Hair Removal Machine 808nm Laser Hair Loss Beauty Machine
Suggested Parameters
The following suggestions are for reference only, and customers in different regions should make reasonable adjustments.
 Single Point Treatment
Set the low frequency to 1Hz and set the higher energy at the same time. The machine is set with factory default parameters, and the user can adjust it according to different situations, but please adjust the energy instead of frequency. In this mode, the pulse width will be automatically adjusted when you adjust the energy.
500W parameters, 300W energy plus 80% pulse width unchanged
 
MenWhite SkinYellow SkinBrown SkinBlack Skin
ParametersEnergy70J/cm265J/cm250J/cm255J/cm2
Pulse Width5-100ms5-80ms5-80ms5-80ms
Frequency1-4Hz1-5Hz1-5Hz1-5Hz

 Sliding Therapy
Set the frequency to 6HZ and set a lower energy. When using this treatment method, the therapist does not need to adjust the parameters, but only needs to choose the number and time of treatment according to the patient's feeling.
500W parameters, 300W energy plus 80% pulse width unchanged
 
Treatment ParametersEnergy: 20J/cm2; Frequency: 6Hz; Pulse Width:50ms
Men and WomenWhite SkinYellow SkinBrown SkinBlack Skin
BeardSliding Speed3cm/s3cm/s5cm/s5cm/s
Cumulative treatment timeevery 0.5min, 5cm2every 0.5min, 5cm2every 1min, 5cm2every 1min, 5cm2
ArmpitSliding Speed3cm/s3cm/s5cm/s5cm/s
Cumulative treatment timeevery 1min, 5cm2every 1min, 5cm2every 1.5min, 5cm2every 2min, 5cm2
HairlineSliding Speed2cm/s2cm/s1cm/s1cm/s
Cumulative treatment timeevery 0.5min, 5cm2every 0.5min, 5cm2every 0.5min, 5cm2every 0.5min, 5cm2
BikiniSliding Speed2cm/s2cm/s1cm/s1cm/s
Cumulative treatment timeevery 1min, 5cm2every 1min, 5cm2every 1.5min, 5cm2every 1.5min, 5cm2
ThighSliding Speed3cm/s3cm/s5cm/s5cm/s
Cumulative treatment timeevery 1min, 5cm2every 1min, 5cm2every 1.5min, 5cm2every 1.5min, 5cm2
CalfSliding Speed3cm/s3cm/s5cm/s5cm/s
Cumulative treatment timeevery 1min, 5cm2every 1min, 5cm2every 1.5min, 5cm2every 1.5min, 5cm2


Before and After Hair Removal Photos:
1200W Diode Laser Hair Removal Machine 808nm Laser Hair Loss Beauty Machine
Cautions after treatment:

1: After finished treatment, the treatment area will feel slightly scorching hot and skin around hair follicles appears erythema, which is normal phenomenon, do ice compress to partial skin for 10-15 minutes if needed;
2: the residual hair on treatment area can pull out in 24 hours or automatically fall off in several days;
3: The current day of treatment, use low temperature water to wash and use liquid skin care products;
4: After treatment, pay attention to protecting moisture and sunscreen

Cautions before and after therapy:
1: One month before treatment, pay attention to the sunscreen;
2: Two weeks before treatment, the treatment area does not remove hair with plucking out, with cream or electrolysis ;
3: Two days before and after treatment, to avoid chemical or mechanical stimulation;
4: Two weeks before and after treatment, to disable the filling or other injection, etc the kind of interventional therapy.

Therapy periods:

Underarm, Face: One Therapy interval---4-6 weeks;
Arms and legs, body: One Therapy Interval----4-6 weeks;
Treatment Period: 3-5 times