Spin Flash Dryer

  The flash dryer is widely used in the dispersion and drying of granular, powdery, paste-like, and filter cake-like false agglomerates in the chemical, pharmaceutical, building materials, food, feed, and other industries. The flash dryer has the advantages of the small occupied areas, low energy consumption, high thermal efficiency, and continuous mass production. The flash dryer body is provided with a rotary cutting device, and the dry material is subjected to shearing, rotating, collision, friction, etc., so that the material is pulverized and refined, and is highly dispersed, thereby achieving the effect of efficiency and rapidly evaporating water. The dryer is equipped with an air filter to achieve the cleanliness of the hot air and to provide production conditions for the hygiene requirements of the food industry. The machine sets the cyclone separation and collecting materials. In addition, the bag dust removal receipt is added to increase the material recovery rate. It can improve the economic efficiency of enterprises. The dryer can be customized according to user needs.

  The flash dryer consists of a dry main engine, feeder, heat source device (hot air furnace or steam), air filter, air blower, cyclone separator, bag filter, and induced draft fan. The hot air tangentially enters the bottom of the dryer and is driven by the agitator to form a powerful rotating wind field. The paste material enters the dryer by the screw feeder. Under the strong action of the high-speed rotating stirring paddle, the material is dispersed under the action of impact, friction, and shearing force, the block material is rapidly pulverized, and it is fully contacted with hot air and heated, and dry. The dehydrated dry material rises with the hot gas flow, and the classification ring intercepts the large particles. The small particles are discharged from the center of the ring to the outside of the dryer and are recovered by the cyclone separator and the dust collector. The dry material is not dried or the bulk material is subjected to centrifugal force, fell to the bottom, and was crushed and dried.

1.  XSG rotating flash drying machine is equipped with a special cooling device at the bottom, thus avoiding material deterioration due to high temperature.
2.  Wind distribution devices can reduce the resistance to drying equipment and provide air volume for the dryer.
3.  This rotary flash dryer uses a particular pressurized sealing device and bearing cooling device to effectively prolong the service life of the drive part.
4.  Material fineness and final moisture content can be adjustable.
5.  Short staying time of material can prevent the material from sticking to the wall and the thermosensitive material from deteriorating.

XSG rotating flash drying machine is applicable to dry viscous, thixotropic, thermosensitive powdery, and granular materials in the dyes, pigment, chemical, ceramics, food, and pharmaceutical industry. The appropriate materials can be dried by this drying equipment include:
  Foodstuffs: soy protein, gelatinized starch, wine trough, wheat sugar, wheat starch, etc.
  Organics: Atrazine (pesticide pesticides), lauric acid, benzoic acid, benzoic acid, bactericidal dan, sodium oxalate, cellulose acetate, organic pigments, and the like.
  Dyes: antimony, black iron oxide, indigo pigment, butyric acid, titanium hydroxide, zinc sulfide, various nitrogen dye intermediate.
 Inorganic materials: borax, calcium carbonate, hydroxide, copper sulfate, iron oxide, barium carbonate, antimony trioxide, various metal hydroxides, various heavy metal salts, synthetic cryolite, and the like.

  Zhengzhou Jiutian Machinery Equipment Co., Ltd. is a comprehensive scientific and technological innovation private enterprise integrating scientific research, development, production, sales, and service. Our company is committed to the research and development and production of series of technical products such as kitchen waste treatment equipment, coal (mud) upgrading equipment, feed dehydration drying equipment, biomass pellet fuel production line, etc. It involves the optimization of treatment projects for the reuse of kitchen waste, the recycling of resources in the field of the circular economy, clean energy, and environmental protection projects, the conversion of waste by-products such as waste residue and waste yeast into feed projects, coal chemical industry such as coal slime and coal mine. The coal refining by-products are transformed into power plant combustion raw materials projects and the recycling of wood chips and sawdust resources into biomass energy projects.

  Our products include:
  Flash dryer, mesh belt dryer, rotary dryer, paddle dryer, heat pump dryer, belt filter press, screw dewatering machine, biomass pellet machine, wood pallet machine, charcoal making machine, and so on.
  At present, Jiutian not only has a huge customer resource system and considerable market share in the country but also in the UK, Russia, Greece, Italy, Israel, Morocco, Congo, Côte d'Ivoire, Madagascar, Australia, India, Vietnam, Laos, Indonesia, Malaysia, Sri Lanka. In Chile, the United States and other countries have established a case of dryers and successfully put them into production, to achieve the quality and technology of dryer products and international standards.

Sale service:
1. Ensure product with high quality and pre-commissioning before delivery;
2. Delivery on time;
3. Provide a full set of documents as per the customer's requirements.

After-sale service:
Provide considerate services to minimize clients' worries.
1. Assist clients to prepare for the first construction scheme;
2. Install and debug the equipment;
3. Train the first-line operators;
4. Examine the equipment;
5. Take the initiative to eliminate the troubles rapidly;
6. Provide technical support;
7. Establish a long-term and friendly relationship.

Service commitment:
1. Provide clients one-year warranty to make sure the machine work well;
2. We always keep a certain inventory level of spare parts, which means the replacements can be sent to you timely;
3. Send every client a preferential quotation.