Automatic Brush Water Filter With Stainlesss Steel Strainer Housing
Introduction
Automatic self-cleaning filter series that offers the most efficient solution to water filtering with varying dirt loads or fluctuating flow rates. The self-cleaning system draws the filter cake from the filter screen discharging the dirt without interrupting the filtration process. The entire filter surface is flushed within 20-30 seconds using minimum flushing water.
This unique design combines a suction scanner with Self Adjusting suction nozzles - to remove and discharge dirt from the filter surface - driven by an electric motor and an internal reversing direction screw which enables a continuous linear movement (back and forth) of the cleaning mechanism.
Structure and principle
The inside structure of the automatic self-cleaning brush filter is made up of the stainless steel strainer and stainless steel wire brush and transmission part. The washing and the drainage are automatically finished by the drive motor and electrical valve. The operation way is automatic running (manual running is also Ok), It is with the double function of the pressure difference and regularly automatic drainage. The automation part takes use of the most advanced and reliable PLC in the world.
When the water flow gets through the filter, the impurity in the water is held by the strainer With the increase of the impurity accumulated on the surface of the strainer, the pressure difference reaches 0.04Mpa. The switch of the pressure difference will give out a signal while the PLC sends an instruction to start the drive motor and open the drainage valve; The impurity accumulated on the strainer will be brushed off with the rotating brush and discharged from the drainage exit. The whole process of brushing and draining require no personal operation and without machine halt. At the same time, the equipment is with the function of regular washing and draining and manual washing and draining to make sure that the water output is safe and reliable in any case.
AAA:
01. What is the capacity (m3/hour)you required for this equipment?
02. What is the material for this filter?
Carbon steel ?or stainless steel (SS304/SS316)?
03. What is the filtration degree?
10 micron or 200 micron?
04. What is the power supply in your country?
220V/60Hz or other?
Specifications:
Model | Inlet and outlet parameter | Drain | D | H | Output power(w) | Motor Kw/r/min |
mm | in | mm |
|
|
|
|
YL-2J | 50 | 2 | 25 | 159 | 840 | 19 | 0.18/1400 |
YL-2.5J | 65 | 2.5 | 25 | 159 | 840 | 28 | 0.18/1400 |
YL-3J | 80 | 3 | 25 | 219 | 860 | 50 | 0.18/1400 |
YL-4J | 100 | 4 | 25 | 219 | 910 | 80 | 0.18/1400 |
YL-5J | 125 | 5 | 25 | 219 | 950 | 125 | 0.18/1400 |
YL-6J | 150 | 6 | 32 | 273 | 965 | 180 | 0.18/1400 |
YL-8J | 200 | 8 | 40 | 325 | 1085 | 320 | 0.18/1400 |
YL-10J | 250 | 10 | 50 | 377 | 1235 | 490 | 0.18/1400 |
YL-12J | 300 | 12 | 65 | 425 | 1260 | 710 | 0.18/1400 |
YL-14J | 350 | 14 | 65 | 478 | 1330 | 970 | 0.18/1400 |
Applications:
Process water
Cooling water processes
Industrial wastewater
Recirculation systems
Irrigation systems
Pre-filtration of disinfection equipment