Dying Cotton and Fabric Waste Water Decoloring Agent for Color Removal
China Dying Cotton and Fabric Waste Water Decoloring Agent for Color Removal, Find details about China Water Decoloring Agent, Wastewater Treatment from Dying Cotton and Fabric Waste Water Decoloring Agent for Color Removal
Basic Info.
Model NO.
BWD-01
Type
DCDA Polymer
CAS
55295-98-2
Usuage
Color Removal for Wastewater
Trademark
bluwat
Transport Package
30kg Pail, 250kg Plastic Drum, 1250kg IBC
Specification
SGS ISO
Origin
China
HS Code
38099100
Model NO.
BWD-01
Type
DCDA Polymer
CAS
55295-98-2
Usuage
Color Removal for Wastewater
Trademark
bluwat
Transport Package
30kg Pail, 250kg Plastic Drum, 1250kg IBC
Specification
SGS ISO
Origin
China
HS Code
38099100
Product Desciption
Our BWD-01 Water Decoloring Agent is used for color removal of dyeing wastewater or effluent with color problem. Especially for cotton, fabric and jeans.
Features:
1) Quaternary cationic polymer
2) Application:
A) Decoloring, flocculating, COD decreasing
B) Mainly used for color removal for dense color waste water from Dyestuffs plants, suitable to treat waste water with activated, acidic And disperse dyestuffs
C) Can also be used to treat waste water from textile industry and dye Houses, pigment industry, printing ink industry and paper industry
Specification:
Usage:
A) Dilutes with 10 - 40 times water and then dosed into the waste water Directly, after being mixed for several minutes, waste is precipitated orAir-floated and the water become clear
B) pH index of the waste water should be adjusted to 7 - 10 for better Result
C) If colority and COD are relatively high, it can be used with the help ofPolyaluminum chloride to reduce treatment cost, whether polyaluminum Chloride is used before or afterwards depends on the flocculation test And the treatment process
Storage:
Can be stored at room temperature, can not be placed in the Sun, within a temperature range of 10 - 30º C
Packing:
30kg/pail, 250kg/plastic drum and 1250kg IBC tank.
Jar test process for BWD-01
1. Make solution of BWD-01, mix with 40 times water to have 2.5% solution for use.
2. Make PAC solution, 1-3% Al2O3
3. Have solution of anionic Polyelectrolyte, 0.1%.
4. Have effluent, test pH value, adjust pH value to 8-9.(It is very important, higher or lower pH, BWD-01 works not well)
5. Add PAC solution, mix with effluent completely. about 1-3 minutes
6. Add BWD-01 solution, mix with effluent completely, about 5-10 minutes
7. Add small content of anionic polyelectrolyte solution, mix slowly to have big floc.
8. Sedimentation
9. Check color for treated effluent
10. Adjust dosage of BWD-01 and PAC to do more test to have better testing result
Features:
1) Quaternary cationic polymer
2) Application:
A) Decoloring, flocculating, COD decreasing
B) Mainly used for color removal for dense color waste water from Dyestuffs plants, suitable to treat waste water with activated, acidic And disperse dyestuffs
C) Can also be used to treat waste water from textile industry and dye Houses, pigment industry, printing ink industry and paper industry
Specification:
| Specifications: | BWD-01 Water Decoloring Agent |
| Appearance: | Colorless to yellowish translucid liquid |
| Solid Content: | ≥50% |
| Specific Gravity at 20°C: | 1.1-1.3 |
| PH Value (30% Solution): | 3-6 |
| Storage Temperature: | 10-30 (oC) |
| Viscosity(25°C,cps): | 50-300 |
| Solubility: | Soluble With Water at Any Rate |
Usage:
A) Dilutes with 10 - 40 times water and then dosed into the waste water Directly, after being mixed for several minutes, waste is precipitated orAir-floated and the water become clear
B) pH index of the waste water should be adjusted to 7 - 10 for better Result
C) If colority and COD are relatively high, it can be used with the help ofPolyaluminum chloride to reduce treatment cost, whether polyaluminum Chloride is used before or afterwards depends on the flocculation test And the treatment process
Storage:
Can be stored at room temperature, can not be placed in the Sun, within a temperature range of 10 - 30º C
Packing:
30kg/pail, 250kg/plastic drum and 1250kg IBC tank.
Jar test process for BWD-01
1. Make solution of BWD-01, mix with 40 times water to have 2.5% solution for use.
2. Make PAC solution, 1-3% Al2O3
3. Have solution of anionic Polyelectrolyte, 0.1%.
4. Have effluent, test pH value, adjust pH value to 8-9.(It is very important, higher or lower pH, BWD-01 works not well)
5. Add PAC solution, mix with effluent completely. about 1-3 minutes
6. Add BWD-01 solution, mix with effluent completely, about 5-10 minutes
7. Add small content of anionic polyelectrolyte solution, mix slowly to have big floc.
8. Sedimentation
9. Check color for treated effluent
10. Adjust dosage of BWD-01 and PAC to do more test to have better testing result
You Might Also Like
4-Ply Design Four Layers of Protection Filtration Efficiency......
LED High Bay Luminaires , UL, Dlc, Ce, RoHS
Carbide Aluminun Inserts Ccgt Uncoated Carbide Turning Inser......
Inexpensive New Designed Crackle Glossy& Tumbled Glass Mosai......
Automatic Legume Multihead Weigher Vffs Vertical Form Fill S......
Industrial Mobile Cooling Heating Air Conditioner for Outdoo......
China Factory of Drop Forged Forging Part and Metal Forged M......
Wet Pan Mill 1100 for Sale/Gold Ore Milling Machine
Raw Material Red 185 Organic Pigment for Ink and Inkjet
20001 Beckman Coulter Lamp Au680 Au480 Au400 Chemistry Analy......
Rexroth 4wmm4 4wmm6 4wmm10 Series Manual Reversing Valve
Cheap Two Seat 18 Inch 450W Electric Moped Ebike with Pedals