Products

Length Adjustable Precast Compound Wall Panel Making Machine

China Length Adjustable Precast Compound Wall Panel Making Machine, Find details about China Wall Panel Machine, Wall Panel Production Line from Length Adjustable Precast Compound Wall Panel Making Machine

Customized
Customized
Equipment Output
30000 To500000sqm/Yaer
Voltage
380V
Panel Size
2440-3300mmx610X40-200mm Normally, Can Be Adjusted
Automatic Degree
Manual , Semi-Automatic,High Automatic
System
Feeding /Mixing /Forming /Demoulding System
Usage
Interior Wall /Floor /Exterior/Roof/Ceiling
Raw Material
Alcium Silicate Board,Cement ,Flyash,EPS (or Ceram
Panel Feature
Light Weight, High Strength, Heat Preservation, He
Trademark
OYADE
Transport Package
Container
Specification
Capacity from 30000 to 500000sqm/yaer
Origin
China
HS Code
8474802000
Customized
Customized
Equipment Output
30000 To500000sqm/Yaer
Voltage
380V
Panel Size
2440-3300mmx610X40-200mm Normally, Can Be Adjusted
Automatic Degree
Manual , Semi-Automatic,High Automatic
System
Feeding /Mixing /Forming /Demoulding System
Usage
Interior Wall /Floor /Exterior/Roof/Ceiling
Raw Material
Alcium Silicate Board,Cement ,Flyash,EPS (or Ceram
Panel Feature
Light Weight, High Strength, Heat Preservation, He
Trademark
OYADE
Transport Package
Container
Specification
Capacity from 30000 to 500000sqm/yaer
Origin
China
HS Code
8474802000

                                                               Machinery system

                           

                              Our improvement on horizontal mould car 

1. The ribs are added on the outside to ensure the flatness of the wallboard.

2. The welding process has been improved to ensure that the welding will not be carried out and the strength of the welding is strengthened.

3. The position of the upper and lower molding table is improved, and it is level with the partition and easy to operate.

4.As shown in the figure, one side is fixed by a steel pipe and the other side is supported. This prevents the blocking plates on both sides from inclined when changing the length.
Length Adjustable Precast Compound Wall Panel Making Machine
5.The upper screw comparision , the screw is changed into the handle, the left picture is the old-style blue screw. The screw is needed for fixing. The picture on the right is the updated one. It is pressed directly with the handle, which makes the installation more convenient and quick.
Length Adjustable Precast Compound Wall Panel Making Machine


                  

                                                             Product type 
 

Product introduce

1. Lightweight: Lightweight composite wallboard materials are made of light aggregates and fly ash. The heavy materials such as reinforced concrete and sandstone have the characteristics of light weight, which is only 1/16 of the quality of brick-concrete structure. The amplitude reduces the longitudinal load of the building structure, reduces the building's own weight, and reduces the construction cost.

2. Insulation: The lightweight composite wallboard is made of EPS The thermal insulation performance is extremely superior to the building energy-saving design standard of the Ministry of Construction, and it ranks first in the domestic similar products.

3. Impermeability: The water absorption rate of lightweight composite wallboard is only 3.3%, which has reached the international advanced level in the same industry.

4, fire performance: lightweight composite wallboard products themselves, never burn. Experiments show that the new wall panel is an ideal fireproof material, and the fireproof capacity of the 9cm thick wall can reach more than 3 hours.

5, sound insulation function: Because the lightweight composite wall board is made of polystyrene as the sandwich material, it has good sound insulation effect, and the hollow sound insulation is more than 40 decibels, reaching the national industry standard.
 

Length Adjustable Precast Compound Wall Panel Making Machine

Five characteristics of lightweight composite wall panels

You Might Also Like