Products

Precast Concrete Hollow Core Wall Panel Making Machine Factory

China Precast Concrete Hollow Core Wall Panel Making Machine Factory, Find details about China Wall Panel Machine, Wall Panel Production Line from Precast Concrete Hollow Core Wall Panel Making Machine Factory

Model NO.
OYADE-2018
Customized
Customized
Equipment Output
30000 To500000sqm/Yaer
Voltage
380V
Panel Size
2440-3300mmx610X40-200mm Normally, Can Be Adjusted
Automatic Degree
Manual , Semi-Automatic,High Automatic
System
Feeding /Mixing /Forming /Demoulding System
Usage
Interior Wall /Floor /Exterior/Roof/Ceiling
Raw Material
Alcium Silicate Board,Cement ,Flyash,EPS (or Ceram
Panel Feature
Light Weight, High Strength, Heat Preservation, He
Trademark
OYADE
Transport Package
Container
Specification
Capacity from 30000 to 500000sqm/yaer
Origin
China
HS Code
8474802000
Model NO.
OYADE-2018
Customized
Customized
Equipment Output
30000 To500000sqm/Yaer
Voltage
380V
Panel Size
2440-3300mmx610X40-200mm Normally, Can Be Adjusted
Automatic Degree
Manual , Semi-Automatic,High Automatic
System
Feeding /Mixing /Forming /Demoulding System
Usage
Interior Wall /Floor /Exterior/Roof/Ceiling
Raw Material
Alcium Silicate Board,Cement ,Flyash,EPS (or Ceram
Panel Feature
Light Weight, High Strength, Heat Preservation, He
Trademark
OYADE
Transport Package
Container
Specification
Capacity from 30000 to 500000sqm/yaer
Origin
China
HS Code
8474802000

Machinery system

1.Raw material Automatic feeding and metering system
 
1)The cement is transported from storage silo into measuring bin through screw cnveyor ..then poured into the mixer .and also the water need to measuring before feeding into the mixer .the water measuring  hopper is near to the cement measuring hoper .
2)The sand and additive  send into the mixer by elevator hopper .

Precast Concrete Hollow Core Wall Panel Making Machine Factory


2.Raw material automatic mixing system

Machine part: Double-shaft mixer 
Capacity available  :1.2/1.5/2.0/2.5/3.0/3.5 sqm 
Introduce:the mixer capacity is related to the mould car quantity , so we will equip the mixer after confirm the capacity with client . so that can makre sure our proposal is suit to you . Features: the double shaft is  to blend the raw material more even ,also save time . different capacity to satisfy different client's requirement . 

Machine part:Second mixing mixer Unique feature :If the mould car quantity is more than 10 units ,then we will equip the second mixing mixer, so as to save the mixing time of the first mixer and improve  working efficiency ,increase productivity . 
Note: normally use one-shaft mixer ,only large capacity will equip second mixing  if small capacity ,second storage hopper is enough . 

Precast Concrete Hollow Core Wall Panel Making Machine Factory

3.Two type of forming car 
Precast Concrete Hollow Core Wall Panel Making Machine Factory

4.Different forming method 

First forming method 
If the mould car is fixed ,there are two different way for casting , the first method :After mixing ,casting the slurry into the second storage hopper .The mobile pouring car will carry the second storage hopper and pumping system move to the mould car along running rail.then the workers pouring/casting  the slurry into the mould car ,it will take around 7 to 10 minutes . ,after pouring ,the panel need curring in the mould car for 8 hours .

Second forming method 

If build a walking frame above the mould car ,  the secondary storage hopper will move along the frame and pour the slurry into the mould car, after pouring ,the workers will scrape the slurry flat with scraper and then  curing the panel in the mould car for 8 hours .

Third forming method 

If  the mould car quantity more than 15sets ,then we adivse mould car movible ,after mixing ,pouring the slurry into the second storage silo ,then pouring into the mould car ,and the workers will scrap the slurry flat using  scraper after that , the mould car will move to the curing area by PLC control the move and the convesion  device change the direction . there curing 8 hours . 
 

5.Machine part:Automtic demould system 

Introduce : it include two parts automatic opening and closing machine and automatic demoulding machine . 
Process:Firstly use opening and closing machine to open the moulds then use the demoulding machine to pull out the panel then put them together and turnove them so as the forklist to move the panels 
Precast Concrete Hollow Core Wall Panel Making Machine Factory

Precast Concrete Hollow Core Wall Panel Making Machine Factory


7.Service Advantage 

*Business communication→Customer visiting→Layout design→Sign contract→Foundation design & Manufacturing→Inspection→Installation→Commissioning

* Full life-cycle value services: Our company provides production line design, cost accounting, installation and operation, equipment maintenance and the whole life cycle technical support

*All-around technical service: we provide technical formula for clients, to help clients to occupy the leading position in the market.
 
*Complete data specification: we provide production line equipment technical data and instructions.

*Quality commitment: The company regards product quality as the lives of enterprises, the main components and wearing parts are made of high quality wear-resistant materials and advanced processing technology, so that the equipment endurable and wear resisting, wearing parts warranty for one year, and our company perennial supply of device of wearing parts.

Precast Concrete Hollow Core Wall Panel Making Machine Factory


 
 
 

 
 

You Might Also Like