Products

Precast Concrete Hollow Core Wall Panel Making Machine Factory

China Precast Concrete Hollow Core Wall Panel Making Machine Factory, Find details about China Wall Panel Machine, Wall Panel Production Line from Precast Concrete Hollow Core Wall Panel Making Machine Factory

Model NO.
YURUI-20180919
Customized
Customized
Equipment Output
30000 To500000sqm/Yaer
Voltage
380V
Panel Size
2440-3300mmx610X40-200mm Normally, Can Be Adjusted
Automatic Degree
Manual , Semi-Automatic,High Automatic
System
Feeding /Mixing /Forming /Demoulding System
Usage
Interior Wall /Floor /Exterior/Roof/Ceiling
Raw Material
Alcium Silicate Board,Cement ,Flyash,EPS (or Ceram
Panel Feature
Light Weight, High Strength, Heat Preservation, He
Trademark
OYADE
Transport Package
Container
Specification
Capacity from 30000 to 500000sqm/yaer
Origin
China
HS Code
8474802000
Model NO.
YURUI-20180919
Customized
Customized
Equipment Output
30000 To500000sqm/Yaer
Voltage
380V
Panel Size
2440-3300mmx610X40-200mm Normally, Can Be Adjusted
Automatic Degree
Manual , Semi-Automatic,High Automatic
System
Feeding /Mixing /Forming /Demoulding System
Usage
Interior Wall /Floor /Exterior/Roof/Ceiling
Raw Material
Alcium Silicate Board,Cement ,Flyash,EPS (or Ceram
Panel Feature
Light Weight, High Strength, Heat Preservation, He
Trademark
OYADE
Transport Package
Container
Specification
Capacity from 30000 to 500000sqm/yaer
Origin
China
HS Code
8474802000

Product introduce
1.New trends in building materials
The lightweight composite wallboard production line is designed to adapt to the current development trend of building materials. Our company has boldly innovated and designed a high-automatic production line, which can be reused through careful design.

2.Green environmental protection
The green environmental protection concept has been integrated into all fields of the world, and the construction industry must leave a huge market space for new wall materials. Lightweight composite wall panels are energy-saving and environmentally friendly wall materials. Suitable for modern frame structure buildings, the application space is huge and the market is huge

3.Extensive raw materials
The light composite wallboard produced by our company has a wide range of raw materials and low prices. The board has the functions of light weight, high strength, heat preservation, heat insulation, waterproof and radiation protection

Precast Concrete Hollow Core Wall Panel Making Machine Factory

 
Panel thickness Panel widthPanel lengthQuantity(block/each car)Sqm/car
5061024406698.2
6061024405886.3
7561024404871.4
9061024404262.5
10061024403856.6
12061024403450.6
15061024402841.7
18061024402435.7
20061024402029.8
 

Machinery system

1.Raw material Automatic feeding and metering system 
Introduce :1.Cement ,flyash,EPS particels will be metering and feeding into the mixer automatically to save the labors and improve working efficiency also it is more environmentally . 
2.Sand (or ceramsite /slag /pumice stone other agregate) and additives will be feeding into the mixer by lifting hopper

Precast Concrete Hollow Core Wall Panel Making Machine Factory

2.Raw material automatic mixing system

Machine part: Double-shaft mixer 
Capacity available  :1.2/1.5/2.0/2.5/3.0/3.5 sqm 
Introduce:the mixer capacity is related to the mould car quantity , so we will equip the mixer after confirm the capacity with client . so that can makre sure our proposal is suit to you . Features: the double shaft is  to blend the raw material more even ,also save time . different capacity to satisfy different client's requirement . 

Machine part:Second mixing mixer Unique feature :If the mould car quantity is more than 10 units ,then we will equip the second mixing mixer, so as to save the mixing time of the first mixer and improve  working efficiency ,increase productivity . 
Note: normally use one-shaft mixer ,only large capacity will equip second mixing  if small capacity ,second storage hopper is enough . 

Precast Concrete Hollow Core Wall Panel Making Machine Factory
3.Automatic forming system 

Machine part:Pump+pipe

Introduce : After the mixer mix the raw material well then the workers use the pump and pipe to cast the slurry into the mould car 
Features:The pump is to make the pouring more even, no need to vibrate, and the working platform will be clean and the material will not be wasted.
 

Machine part: Automatic mould car 

Introduce : this automatic car will be equipped only for full automatic degree ,for semi-automatic there will be another type . It can produce panel in different size and thickness. It also can produce composite wall panel and solid wall panel . 
Note : if the client only need produce compsite wall panel we will equip mould car withour steel plate .
we will equip mould cars according to client capacity ,we will not equip more than client's need .


Precast Concrete Hollow Core Wall Panel Making Machine Factory
 

Machine part:Automatic demould system 

Introduce : it include two parts automatic opening and closing machine and automatic demoulding machine . 
Process:Firstly use opening and closing machine to open the moulds then use the demoulding machine to pull out the panel then put them together and turnove them so as the forklist to move the panels 
Precast Concrete Hollow Core Wall Panel Making Machine Factory

Service Advantage 

*Business communication→Customer visiting→Layout design→Sign contract→Foundation design & Manufacturing→Inspection→Installation→Commissioning

* Full life-cycle value services: Our company provides production line design, cost accounting, installation and operation, equipment maintenance and the whole life cycle technical support

*All-around technical service: we provide technical formula for clients, to help clients to occupy the leading position in the market.
 
*Complete data specification: we provide production line equipment technical data and instructions.

*Quality commitment: The company regards product quality as the lives of enterprises, the main components and wearing parts are made of high quality wear-resistant materials and advanced processing technology, so that the equipment endurable and wear resisting, wearing parts warranty for one year, and our company perennial supply of device of wearing parts.

Precast Concrete Hollow Core Wall Panel Making Machine Factory


 
 
 

 
 

You Might Also Like