Products

Ane Wind Turbine Solar Generator for Mobile Communication Station Power Supply Solution Plan
Ane Wind Turbine Solar Generator for Mobile Communication Station Power Supply Solution Plan

Ane Wind Turbine Solar Generator for Mobile Communication Station Power Supply Solution Plan

China Ane Wind Turbine Solar Generator for Mobile Communication Station Power Supply Solution Plan, Find details about China Communication Base Station, Power Supply from Ane Wind Turbine Solar Generator for Mobile Communication Station Power Supply Solution Plan

Trademark
ANE
Transport Package
Plywood Box
Specification
CE, EN61400-2
Origin
China
HS Code
85023100
Trademark
ANE
Transport Package
Plywood Box
Specification
CE, EN61400-2
Origin
China
HS Code
85023100
 The communication base station supply system solution plan
 
A. System introduction
The new energy communication base station supply system is mainly used for those small base station situated at remote area without grid. The main loads of those small base station are 48V with rated 500W power more or less, the daily power consumption is about 12kwh. Here we adopt 5kW wind turbine together with 5kW solar module as the new energy power supply system, it can fully meet the need of those small base station for 24 hours continuous working.
Ane Wind Turbine Solar Generator for Mobile Communication Station Power Supply Solution Plan
B. System configuration
 
Take the present 5kW wind+5kW solar as example.
 
1.System diagram
 
 Ane Wind Turbine Solar Generator for Mobile Communication Station Power Supply Solution Plan
2. Configuration list
 
5kW wind+5kW solar system configuration list
No.NameSpec.Qty.
15kw pitch controlled wind turbine5kW/DC200V1
2Tilt-up tower and accessories8m/two segment1
3Auto safety protection systemBK-5001
4Wind control moduleDC200V-DC48V1
55kw solar module255w/poly20
6Solar bracket5kw/ground mount1set
7Solar control moduleTA48-S1001
8Remote monitor systemGPRS1
9Equipment cabinet600*600*16001
10Battery group2V/2000AH24
 
 
C. System advantage
 
1.Supply power 24 hours continuously,make sure all communication equipment run normally.
 
1.1 The particular patent mechanical pitch controlled technology
 
1.1.1 ANE wind turbine with lower startup wind speed
 
Double degree pitch control mechanism ensures blades have an optimal startup angle. Wind rotor can be started at 2.5m/s wind speed. It has higher efficiency than other normal turbine.
 
1.1.2 Stable running when wind speed is higher than rated wind speed.
 
The blade angle is of minus value under pitch control when speed is over rated wind speed. It makes system have a stable output power. Because of that, the wind turbine can be 30% more output power than normal wind turbine. Showing curve as below:
Ane Wind Turbine Solar Generator for Mobile Communication Station Power Supply Solution Plan
1.2 Professional wind control module for base station
 
The ANE wind control module is professional designed for base station,specially suitable for the new energy power system. It has the function of floating charge,equalized charge etc. for the battery management and prevent the battery overcharge or over discharge. And also have the function of wind turbine maximum power tracking (MPPT), to make more efficient conversion use of wind power. It can have several different settings according to different kinds of battery.
 
The ANE wind control module can convert the input voltage DC120V-DC350V into DC48V/24V and lead the green energy directly to the communication loads without any other intermediate links to ensure the efficiency. Meantime,this module adopts  the voltage reducing technology,compared with normal DC48V/24V wind controller, it has also improved the green energy using efficiency and reduced the loss or cost of system cables.
 
The ANE wind control module has the battery supply warning signal,the signal is  available to user extensions, such as alarm or start up the backup power source (mains grid or diesel generators), it improved the system reliability of the long time power supply.
 
1.2 Professional solar control module for base station
 
The ANE solar control module is professional designed for base station,specially suitable for the new energy power system. It has the function of floating charge,equalized charge etc. for the battery management and prevent the battery overcharge or over discharge. And also have the function of solar module maximum power tracking (MPPT), to make more efficient conversion use of solar energy. It can have several different settings according to different kinds of battery.
 
The ANE solar module can convert the input voltage DC120V-DC350V into DC48V/24V and lead the green energy directly to the communication loads without any other intermediate links to ensure the efficiency. Meantime,this module adopts  the voltage reducing technology,compared with normal DC48V/24V wind controller, it has also improved the green energy using efficiency and reduced the loss or cost of system cables.
 
The ANE solar control module has the battery supply warning signal,the signal is  available to user extensions, such as alarm or start up the backup power source (mains grid or diesel generators), it improved the system reliability of the long time power supply.
 
The ANE solar control module has characteristics with high integration, high efficiency and congruent protection functions and has been widely used in the field of new energy power generation.

2. Easy installation!
 
2 .1 Tilt-up tower
Easy to install without any heavy equipment such as crane, save installation cost.
Carry and installation are not limited by landform, especially for mountain area and island.
 
 
2.2 Solar Special Bracket
    Performance Feature
   1.Optimize mechanical structure design, easy installation.
   2.Surface hot galvanizing treatment, long service life.
   3.Customized hook, briquetting, pathway and connection, match all installation, easy operation.
 Ane Wind Turbine Solar Generator for Mobile Communication Station Power Supply Solution Plan
2.3 High System Integration!
Wind power control module, solar integration module and remote control module are gathered into one cabinet and controlled by central. Operation reliable, easy installation, easy maintainence.

3. Easy Maintainence, Unattended Operation!
3.1 ASP System (Automatic safety protection system)
 ASP system, our patent product is unique protection system in China. It can control the wind turbine to run or stop by testing the environment wind speed and system working voltage. When the environment wind speed or system voltage is over the set value, it will shut up the wind turbine. When the wind speed is lower than 25m/s, it will release the brake system, wind turbine restart to work. ASP makes nobody guard come true.
 
3.2 Remote Monitoring And Central Control
Remote monitoring and control service is available, you can learn real-time running status of the wind turbine and read the output power data effectively. The remote monitoring APP for mobile phone can be available soon.

3.3 Tilt-up Tower, Easy Maintainence, Low Cost!
    Make maintainence much more convenient than the normal tower. Low cost without any heavy equipments. It ensures the wind turbines run healthy for a longer service life.
 
D.5KW Wind Turbine Technical Parameters
 
Model AH-5kW
Wind rotor diameter (m)5.6m
Blade material and quantityFiber glass reinforced * 3
Rated power / max power (kw)5/6
Rated wind speed (m/s)11
Rated rotate speed (rpm)240
Working wind speed (m/s)3-30
Startup wind speed (m/s)2.5
Survived wind speed (m/s)60
Working voltage (v)DC400V
Speed regulation methodpitch-controlled
Stop methodAutomatic electrical brake
Generator styleThree phase, permanent magnet
Wind turbine weight (kg)400
AAA Tower height / weight (m/kg)8/550
 
E.Typical Cases

1. Jinchang Project in Gansu
 
ANE company started to supply wind solar hybrid power system for the communication base station in Jinchang, Jiuquan and other districts from 2009. These systems solve the electrical problem of the local stations. It could supply 24 hr power to the stations.
From 2009, we have supplied more than 800 sets of these systems in China market by now.

2. Tajikistan Project
 
AEN company have been supplying wind solar hybrid power system for the communication base station in Tajikistan from 2011. These systems solve the electrical problem of the local stations. It could supply 24 hr power to the stations. The ASP system, remote monitoring APP, easy maintainence, low cost got highly appreciated by the local project director.
From 2009, we have exported more than 250 sets of these systems by now.
 


 

You Might Also Like