Chevron belts transport bulk or packed materials on a steep slope, the design reduces the risk of slipping or falling back, even transportation on an inclined plane. Compared with flat belts, a larger quantity of materials can be transported, and the top cover and profile are moulded in one piece for better adhesion and resistance.

Chevron belts are for general use, some models are specially made to be oil-resistant or abrasion-resistant, with all the usual characteristics of flat belts. They can provide optimum performance in a wide range of temperatures, from below freezing at -25ºC up to +150ºC, depending on the type.

SR-Oil resistant conveyor belts consist of special oil resistant  cover compounds, which provide great resistance against mild solvents and mineral oils. And the belts are used for conveying materials of forestry and recucling plants.

The carcass reinforcement has high tensile strength with impact resistance, and is bonded between layers of cushion rubber that provide excellent adhesion and load support. The belts provide good resistance to chemical penetration damage and optimum adhesion between the plies.

Within the carcass of the belt, the insertions can be made from polyester/polyamide (EP) or nylon/nylon(NN).

Selection of a type and height of profiles depends on the material to be conveyed and the angle of inclination:


Application:

• quarries, sandpits
• cement works, lime works
• farming: conveying of beets, grains, potatoes, fertilizers, wooden chips
• coal and coke transport
• sugar refineries
• salt mines
• recycling: garbage
• Approximately 30 degrees for slightly rolling materials: gravel, coal, etc.
• Approximately 40 degrees for clumping or sticky materials: wet sand or earth.
• For greater inclined angles, side wall belting may be more suitable.

 

Specification:
Pattern: Open V, Closed V, U type, Y type etc.
Belt width: B400-B1400mm
Pattern height: 5, 10, 15, 20, 25, 30mm
Pattern pitch: 125, 200, 250, 300.400, 500mm and acailable request. 
Cover Grade:
•General Light Duty Service
    Common References: DIN-Z is very economical for moderately abrasive to conveyor small size materials.
•Medium Abrasion Resistance
    Common Reference: DIN-Y, DIN-N, RMA 2, AS-N are for moderate abrasion resistance applications, mostly 
    above ground. Regularly used for transportation of Coal, crushed ores, limestone, sand, cements etc.
•High Abrasion Resistance
    Common Reference: DIN-X, DIN-M, RMA1, AS-M are excellent abrasion resistance against cutting, impact,      
    heavy rocks, sharp stones.
•Super Abrasion Resistance
    Common Reference: DIN-W is used in extremely abrasive applications such as Copper & ore, sinter, coke. It 
    provides high resistance without increasing cover thickness and weight of the belt. 


Our packing:
There is a variety of packing solutions we can offer, and also be customized according to your requirements or market's requires, such as different colors and lables.


SR Belting Business FAQ

Q:What is your production capacity?

A:SR Belting has 11 production lines and its capacity is 5000meters per day.

Q:How about your lead time?

A: It is 20 ~ 25days for regular belts.

Q: What is your M.O.Q ?

A: M.O.Q is 1*20GP.  The less quantity is ok but its cost will be higher.

Q: Do you have belt warranty?

A: At least 12months service life for regular belt. HR T4+ belt 3~6month.

Q: What certificates do you have ?

A: SR Belting has obtained ISO9001,ISO24001 and ISO28001 certifications.

 

Shandong Shengrun Rubber Co.Ltd ( SR Belting ) is a manufacturer which has specialized in producing conveyor belt for more than 20 years. Products are used in mining, coal ,port, metallurgy, cement, transportation and hoisting of materials.

SR Belting always strives to assure the safety of conveyor belts to meet and exceed the national standards and customers satisfactions with its products. SR Belting has obtained ISO9001,ISO24001 and ISO28001 certifications.

SR Belting manufactures conveyor belts based on customers' requirements as Global ISO, German DIN, SANS and RMA etc.

We have independent design, research and development capabilities and can be customized accroding to customers' requirement.
Our company possesses a complete set of detection equipment, the independent chemical analysis and physical labs, ensuring all the raw materials to provide excellent quality products. 

We sincerely welcome friends at home and abroad to visit our factory to discuss cooperation and agency business.

Our partners: CHINA SHENHUA, CNBM, SINOMA, LAFARGE, SHOUGANG GROUP, CHINA HUANENG

EXPO: