Product description:
Chevron belts transport bulk or packed materials on a steep slope, the design reduces the risk of slipping or falling back, even transportation on an inclined plane. Compared with flat belts, a larger quantity of materials can be transported, and the top cover and profile are moulded in one piece for better adhesion and resistance.

Chevron belts are for general use, some models are specially made to be oil-resistant or abrasion-resistant, with all the usual characteristics of flat belts. They can provide optimum performance in a wide range of temperatures, from below freezing at -25ºC up to +150ºC, depending on the type.

Within the carcass of the belt, the insertions can be made from polyester/polyamide (EP) or nylon/nylon(NN).
It is suitable for conveying various corrosive pointless lumps, granular or powders such as coal, coke, sand and cement in either bulk or packaged materials under normal room temperature.
The edges of the belt can be customized depending on the required use, can either be cut-edged or mould-edged.

Selection of a type and height of profiles depends on the material to be conveyed and the angle of inclination:

Belt Application:

• quarries, sandpits
• cement works, lime works
• farming: conveying of beets, grains, potatoes, fertilizers, wooden chips
• coal and coke transport
• sugar refineries
• salt mines
• recycling: garbage
• Approximately 30 degrees for slightly rolling materials: gravel, coal, etc.
• Approximately 40 degrees for clumping or sticky materials: wet sand or earth.
• For greater inclined angles, side wall belting may be more suitable.

Advantage:
NN(Nylon/Nylon) conveyor belt
  •High tensile strength
  •Excellent troughability
  •High resistance against impact
  •Strong adhesion and less ply separation
  •Good accommodation to carrier roller and being well kept straight on
EP(Polyester/Nylon) conveyor belt 
  •Minimizing the moving distance of take-up
  •High Modulus
  •Excellent water resistance
  •Suitable for long lines

Specification:
Pattern: Open V, Closed V, U type, Y type etc.
Belt width: B400-B1400mm
Pattern height: 5, 10, 15, 20, 25, 30mm
Pattern pitch: 125, 200, 250, 300.400, 500mm and acailable request.


Product Process:


Our packing:
There is a variety of packing solutions we can offer, and also be customized according to your requirements or marker's requires, such as different colors and lables.


SR Belting Business FAQ

Q:What is your production capacity?

A:SR Belting has 11 production lines and its capacity is 5000meters per day.

Q:How about your lead time?

A: It is 20 ~ 25days for regular belts.

Q: What is your M.O.Q ?

A: M.O.Q is 1*20GP.  The less quantity is ok but its cost will be higher.

Q: Do you have belt warranty?

A: At least 12months service life for regular belt. HR T4+ belt 3~6month.

Q: What certificates do you have ?

A: SR Belting has obtained ISO9001,ISO24001 and ISO28001 certifications.

 

Shandong Shengrun Rubber Co.Ltd ( SR Belting ) is a manufacturer which has specialized in producing conveyor belt for more than 20 years. Products are used in mining, coal ,port, metallurgy, cement, transportation and hoisting of materials.

SR Belting always strives to assure the safety of conveyor belt to meet and exceed the national standards and customers satisfactions with its products. SR Belting has obtained ISO9001,ISO24001 and ISO28001 certifications.

SR Belting manufactures conveyor belts based on customers' requirements as Global ISO, German DIN, SANS and RMA etc.

We have a independent design, research and development capabilities and can be customized to customer requirement.
Our company possesses a complete set of detection equipment, the independent chemical analysis and physical labs, ensuring all the raw materials to provide excellent quality products. 

We sincerely welcome friends at home and abroad to visit our factory to discuss cooperation and agency business.

Our partners: CHINA SHENHUA, CNBM, SINOMA, LAFARGE, SHOUGANG GROUP, CHINA HUANENG

EXPO: