China Save Enegry 28mm Pet Preform Plastic Injection Molding Machine 130ton, Find details about China Injection Machine, Injection Machinery from Save Enegry 28mm Pet Preform Plastic Injection Molding Machine 130ton
Model Item | D-RI 130 |
Screw diameter(mm) | 45 |
Injection pressure(Mpa) | 151 |
Shot weight(PS) (g) | 257 |
Screw L/D ratio | 18:1 |
Screw stroke (mm) | 191 |
Screw speed(r.p.m) | 5-170 |
Injection rate (cm3/s) | 125 |
Plasticizing capacity(g/s) | 22.5 |
Clamping stroke(tons) | 130 |
Mould clamping stroke (mm) | 375 |
Max. daylight opening (mm) | 805 |
Mould thickness (Min.-Max.) (mm) | 150-430 |
Space between tie-bars (mm) | 420*420 |
Hydraulic ejection force (tons) | 3.8 |
Hydraulic ejector stroke (mm) | 115 |
Max. pump pressure(Mpa) | 16 |
Motor power(KW) | 13 |
Heater power(KW) | 6.3 |
Temperature control zones | 3+1 |
Tank capacity (L) | 220 |
Machine dimension(L*W*H) | 4150mm*1290mm*1800mm |
Machine weight(ton) | 4.5 |
Name | No. |
Heating collar(big) | 4pcs |
Heating collar(small) | 4pcs |
Contactor | 2pcs |
Nozzle | 1set |
Limit switch | 2pcs |
Oil seal | 4pcs |
O-ring seal | 8pcs |
Pipe connector | 2pcs |
Mould-clamping unit | 8pcs |
Screw | 8pcs*2 |
Grease oil | 1bucket |
Foot base | 8pcs |
book | 1set |