Products

Lavina Bush Hammer/Tungsten Bush Hammer/Finishing Hammer Diamond Grinding

China Lavina Bush Hammer/Tungsten Bush Hammer/Finishing Hammer Diamond Grinding, Find details about China Bush Hammer, Bush Hammer Plate from Lavina Bush Hammer/Tungsten Bush Hammer/Finishing Hammer Diamond Grinding

Model NO.
BTBH-01
Trademark
best
Origin
China
Model NO.
BTBH-01
Trademark
best
Origin
China
Lavina Bush Hammer/Tungsten Bush Hammer/Finishing Hammer Diamond Grinding


The Roughness of the bush hammered surface can be adjusted with our bush hammer through adjustment of spring elasticity on the bush hammer, or through the pressure of the manual grinding machine. Loosening spring elasticity or less pressure with increase the roughness of hammering result and tightening the springs or increase machine pressure will reduce roughness to give the bush hammered surface a finer look.

Use and maintenance of bush hammer
  • Operating Speed: 700-800 RPM
  • Wet use strongly recommended and the more water the better
  • Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the tungsten steel
  • After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust
  • Roller tips can be re-dressed with diamond blades when they become inefficient.


Lavina Bush Hammer/Tungsten Bush Hammer/Finishing Hammer Diamond Grinding
Lavina Bush Hammer/Tungsten Bush Hammer/Finishing Hammer Diamond Grinding



 

You Might Also Like