FRP Multi Media Filter For Water and Waste Water Treatment




FRP Multi Media Filter can be installed directly after the mains pipe to provide clean and 
 
clear filtered water for the whole house. Standard unit contain multiple layer of gravel, 
 
coarse sand & fine sand to remove mud & sediment up to 5-10 microns, and contain granular 
 
activated carbon to remove chlorine, taste, odour, colour and organic chemicals.


Specification
Diameter: 9"
Height: 42"
Inlet/ Outlet/Drain size: 1"
Capacity: 45L 
Max. Working Pressure: 25 - 125 psi (2 - 8.6 bars)
Max. Working Temperature: 120F
Time controller for backwash cycle according to a pre-set schedule
Flow controller to limit backwash flow
 
 

Features
Made by high quality & long lasting stainless steel and FRP housing.
Contain with active carbon to remove chlorine, dirt, rust, iron, repulsive smell and to 
 
prevent disease.
Convey water to any part of house or shop such as water tank, washroom, kitchen and garden.
Easy to install and operate, free from any mechanical or electrical connection.
Remove dirty water through a backwash system.
Produced to the highest international standards.
Average Life Span is 3 years.

Benefits
Low maintenance cost
Easy backwash system
Easy to use and operate
Multi layer filter element
Water pressure not affected
Centralised filteration system
Long lasting
No electricity required


Technical Parameters:

 
 



Application:
Widely used in electricity, electronics, beverages, water, petroleum, chemical, metallurgy, textile, paper,
food, swimming pools, municipal engineering and other process water, domestic water, drinking water, recycled water and wastewater pre-treatment areas.