Products

HDPE Forma Plastics 8003 Medicine Bottle Manual Box Hollow Blow Molding PE Raw Material High Density Polyethylene

China HDPE Forma Plastics 8003 Medicine Bottle Manual Box Hollow Blow Molding PE Raw Material High Density Polyethylene, Find details about China HDPE, Plastics from HDPE Forma Plastics 8003 Medicine Bottle Manual Box Hollow Blow Molding PE Raw Material High Density Polyethylene

Model NO.
8003
Model NO.
8003
  • TAISOX® 8003
    High Density Polyethylene
    Formosa Plastics Corporation
    Product Description:
    TAISOX® 8003 is a High Density Polyethylene material. It is available in Asia Pacific, Europe, or North America for blow molding. 

    Important attributes of TAISOX® 8003 are:
    • Chemical Resistant
    • Good Stiffness
    • Rigid

    Typical applications include:
    • Bottles
    • Consumer Goods
    • Containers
    • Medical/Healthcare
    • Tanks
     
     
    General 
    Material Status 
    • Commercial: Active
    UL Yellow Card 1 
    • E483286-102744063
    Search for UL Yellow Card 
    • Formosa Plastics Corporation
    Availability 
    • Asia Pacific
    • Europe
    • North America
    Features 
    • Chemical Resistant
    • Good Stiffness
    • High Density
    • High Rigidity
    		 
    Uses 
    • Bottles
    • Pharmaceuticals
    • Tanks
    • Tool/Tote Box
    • Toys
    Forms 
    • Pellets
    Processing Method 
    • Blow Molding
    Physical
    Nominal Value
    Unit
    Test Method
    Density
    0.958
    g/cm³
    		ASTM D1505
    Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
    0.25
    g/10 min
    		ASTM D1238
    Environmental Stress-Cracking Resistance (ESCR)
    30.0
    hr
    		ASTM D1693
    Hardness
    Nominal Value
    Unit
    Test Method
    Durometer Hardness (Shore D)
    69
     
    		ASTM D2240
    Mechanical
    Nominal Value
    Unit
    Test Method
    Tensile Strength
    		  ASTM D638
    Yield
    4410
    psi
    		 
    Break
    5400
    psi
    		 
    Tensile Elongation (Break)
    1000
    %
    		ASTM D638
    Impact
    Nominal Value
    Unit
    Test Method
    Tensile Impact Strength
    163
    ft·lb/in²
    		ASTM D1822
    Thermal
    Nominal Value
    Unit
    Test Method
    Brittleness Temperature
    -94.0
    °F
    		ASTM D746
    Vicat Softening Temperature
    261
    °F
    		ASTM D1525
    Melting Temperature
    273
    °F
    		 
    Additional Information
    Notched Izod Impact Strength, ASTM D256: 25 kg-cm/cm²
    Die Swell Ratio, FPC Method: 1.55
    Pich-off thickness, FPC Method: Good
    Injection
    Nominal Value
    Unit
     
    Processing (Melt) Temp
    320 to 356
    °F
     
 
HDPE Forma Plastics 8003 Medicine Bottle Manual Box Hollow Blow Molding PE Raw Material High Density PolyethyleneHDPE Forma Plastics 8003 Medicine Bottle Manual Box Hollow Blow Molding PE Raw Material High Density PolyethyleneHDPE Forma Plastics 8003 Medicine Bottle Manual Box Hollow Blow Molding PE Raw Material High Density Polyethylene

You Might Also Like