Z-LION 50PCS 3.2mm diameter Diamond Sanding Tool Needles Coated Rotary head Burr Point Grinding Rod Tools Alloy

SPECIFICATIONS

* 50 boxed handle
* diameter: 3.2mm
* Length: 5mm
* mesh number: 120 mesh
 

Material:Emery abrasive head

The number of 50

Packed in plastic boxes.

Connecting rod specification:3MM

Suitable for electric mill and table mill

Used for jade peeling grinding engraving

Metal grinding tool dressing and polishing deburring engraving

Glass engraving and polishing

Adopts the imported diamond powder refined molding, the use has the hardness, the wear resistance, and the excellent impact resistance, the product involves the stone, the ceramic, the glass, the hard alloy, the precious jade processing and so on the field, has the cutting seam small, can be used to polish, the cutting object surface, the application scope is wide.

Inverted mouth type 5 pieces: 3.17×2.5, 3.2, 4.0, 5.0, 6mm

Cylindrical head 4 pieces: 3.17×3.0, 4.0, 5.0, 6.0mm

Ball type 4 pieces: 3.17×3.0, 4.0, 5.0, 6.0mm

Torch type 5 pieces: 3.17×2.5, 3.5, 4, 5, 6mm

Cylindrical flat head 3 pieces: 3.17×4, 5, 6mm

Umbrella type 3 pieces: 3.17×4, 8, 10mm

Round ladder type 2 pieces: 3.17×8, 10mm

D type round edge 7 pieces: 3.17 ×12 diameter ×2 thickness, 3.17 ×12 diameter ×3 thickness, 3.17 ×12 diameter ×2.5 thickness, 3.17 ×16 diameter ×3 thickness ×2 pieces, 3.17 ×16 diameter ×4.5 thickness ×2 pieces.

D type flat edge 7 pieces: 3.17 handles ×12 diameter ×1.5 thickness, 3.17 handles ×12 diameter ×2 thickness, 3.17 handles ×12 diameter ×3 thickness, 3.17 handles ×16 diameter ×3 thickness ×2 pieces, 3.17 handles ×16 diameter ×4.5 thickness ×2 pieces.
 

Needle type 7 pieces: 3.17×2.5, 3.5, 4 two pieces, 5 two pieces, 6mm

1 piece of circular inverted cone concave surface: 3.17×10

1 piece of circular inverted cone plane: 3.17×10

Round Ding concave edge type 1 piece: 3.17×12×3.5

Tips: Please pay attention to the following matters when using diamond tools:

1. When installing the tool, we must try whether the tool beats. If it beats, we can not work directly, and we should adjust it to not jump.Otherwise, the tool will wear out quickly and the carving will not be very smooth.Adjust method: use the small wrench to change the chuck to gently tap the high-speed turning tool handle until the tool is stable.The electronic machine is forbidden to beat, the adjustment method is to loosen the chuck, the tool to turn an Angle or stretch out and indent a little.

2. Water must be used for cooling (a drip device similar to hospital intravenous drip). For example, dry drill, the diamond on the tool head will be graphitized due to overheating, which will soon wear and scrap.

3. When drilling, try to avoid shaking, as shaking can cause partial damage to the tool and accelerate damage to the entire tool.

4. RPM as high as possible.The linear velocity is generally required to be no less than 10-20 meters per second.

5. Light pressure feed, diamond tools rely on grinding to process the workpiece, excessive force, grinding powder is not easy to eliminate, the tool is also easy to damage.