Products

Self Standing Cryogenic Vial, Gamma Sterile

China Self Standing Cryogenic Vial, Gamma Sterile, Find details about China Cryogenic Vials Without O-Rings, Cryoking Cryogenic Vials from Self Standing Cryogenic Vial, Gamma Sterile

Model NO.
88-905X 88-910X 88-915X 88-920X
Sterilization
Pre-Sterile with Radiation
Special Design
Designed and Tested for Cryoboxes
Pyrogenic
Certified Free of Pyrogen, Nucleases, Foreign DNA
Working Temperature
-196 C to 121c
Identification
Six Different Colored Caps for Easy Identification
Without O-Rings
Yes
Material of Tubes
PP
Type
Vials
Trademark
Biologix Brand
Transport Package
25PCS/Bag, 20bags/Pack, 2packs/Case
Specification
CE, ISO, FDA
Origin
Changzhou, Jiangsu
Model NO.
88-905X 88-910X 88-915X 88-920X
Sterilization
Pre-Sterile with Radiation
Special Design
Designed and Tested for Cryoboxes
Pyrogenic
Certified Free of Pyrogen, Nucleases, Foreign DNA
Working Temperature
-196 C to 121c
Identification
Six Different Colored Caps for Easy Identification
Without O-Rings
Yes
Material of Tubes
PP
Type
Vials
Trademark
Biologix Brand
Transport Package
25PCS/Bag, 20bags/Pack, 2packs/Case
Specification
CE, ISO, FDA
Origin
Changzhou, Jiangsu

 

Volume

Threa
Self Standing Cryogenic Vial, Gamma Sterile
Self Standing Cryogenic Vial, Gamma Sterile
Self Standing Cryogenic Vial, Gamma Sterile


Characteristic
Made of medical grade polypropylene; Can be repeatedly frozen and thawed

Self-Standing and external threads

Vials have a white writing area and black graduations

Three codes,  2D barcode on bottom, 1D barcode and human readable numbers on side, on one vial make identification more convenient than ever

Gamma radiation sterilized; DNase & RNase free, endotoxin free, foreign DNA free

CryoKING Combo: 2D Barcoded Cryogenic Vials and compatible polycarbonate Cryogenic Boxes are available as a set

Working temperature: stable from -196°C to 121°C

Suitable for liquid nitrogen freezing

 

Order Information 
 
Cat #

Volume

Thread TypeBottom BarcodeWriting AreaSide BarcodeSterileUnit
88-905X0.5mlExternalYesYesYesYes25 Sets/Bag, 40 Bags/Case

88-910X

1.0mlExternalYesYesYesYes25 Sets/Bag, 40 Bags/Case
88-915X1.5mlExternalYesYesYesYes25 Sets/Bag, 40 Bags/Case
88-920X2.0mlExternalYesYesYesYes25 Sets/Bag, 40 Bags/Case
88-921X2.0mlInternalYesYesYesYes25 Sets/Bag, 40 Bags/Case
88-950X5.0mlExternalYesYesYesYes25 Sets/Bag, 40 Bags/Case

X: Cap Color    0-White, 1-Red, 2-Green, 3-Blue, 4-Yellow*, 5-Purple, 7-Clear


Self Standing Cryogenic Vial, Gamma Sterile
1.What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.

2.What are autoclaving guidelines of plastics?

To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.

3.What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc. 
 

You Might Also Like