PVC Based Heat Curing Caulking Adhesive Replace Terosol 6302r
China PVC Based Heat Curing Caulking Adhesive Replace Terosol 6302r, Find details about China Tereson Al 6302r Adhesive, Caulking Adhesive from PVC Based Heat Curing Caulking Adhesive Replace Terosol 6302r
Basic Info.
Model NO.
TS6302
Material
Epoxy
Classification
Room Curing
Main Agent Composition
Epoxy Resin
Characteristic
Waterproof
Promoter Composition
Curing Agent
Composition
Epoxy
Color
White
Private Label Service
Yes
Free Sample
Yes
Shelf Life
Yes
Trademark
Customized
Transport Package
Paper Carton
Specification
450g/tube
Origin
China
HS Code
3506100010
Model NO.
TS6302
Material
Epoxy
Classification
Room Curing
Main Agent Composition
Epoxy Resin
Characteristic
Waterproof
Promoter Composition
Curing Agent
Composition
Epoxy
Color
White
Private Label Service
Yes
Free Sample
Yes
Shelf Life
Yes
Trademark
Customized
Transport Package
Paper Carton
Specification
450g/tube
Origin
China
HS Code
3506100010
Product Desciption
TS-6302 is heat cure epoxy caulking adhesive for powder coating. It's the replacement of Terosol AL 6302R.
Product Features:
1, No solvent
2, Won't become liquid over 210ºC
3, Suitable for powder coating
4, Don't need primer. It has good bonding strength with most metals.
Product Application:
It's used for automobile roiling edge, including card door, cab floor joint, cab floor top cover, trunk lid, wheel housing, engine cover etc. The adhesive main function is bonding, sealing, shock absorption and rust prevention.
Curing Method:
Heat cure. Normally, heating temperature is 190ºC, and curing time is 30 minutes. It can resist 210ºC for some hours in oven.
Technical Data Sheet:
How to use:
1, Part surface should be no oil, dust and impurity
2, Apply the adhesive on parts according to technological requirements. Adhesive thinnest part should be over 1mm. Control the air pressure at 0.4-0.8 Mpa when using pneumatic gun.
3, Heat cure. At 160-180ºC for 30 minutes, the adhesive will full cure.
Packing:
310ml/tube, net weight 460g/tube
Product Features:
1, No solvent
2, Won't become liquid over 210ºC
3, Suitable for powder coating
4, Don't need primer. It has good bonding strength with most metals.
Product Application:
It's used for automobile roiling edge, including card door, cab floor joint, cab floor top cover, trunk lid, wheel housing, engine cover etc. The adhesive main function is bonding, sealing, shock absorption and rust prevention.
Curing Method:
Heat cure. Normally, heating temperature is 190ºC, and curing time is 30 minutes. It can resist 210ºC for some hours in oven.
Technical Data Sheet:
| Main component | Modified epoxy resin |
| Appearance | Paste, no particle and bubbles |
| Density (g/cm³) | 1.4±0.1 |
| Viscosity (g/min) | 30-70 |
| Non volatile matter (%) | ≥98 |
| Curing condition (160ºC, 30min) | Full cure |
| Shearing strength (Mpa) | ≥15 |
| Tensile strength (N/25mm) | ≥50 |
| Sag of sealant (mm) | ≤5 |
| Appearance after curing | No crack and bubbles |
How to use:
1, Part surface should be no oil, dust and impurity
2, Apply the adhesive on parts according to technological requirements. Adhesive thinnest part should be over 1mm. Control the air pressure at 0.4-0.8 Mpa when using pneumatic gun.
3, Heat cure. At 160-180ºC for 30 minutes, the adhesive will full cure.
Packing:
310ml/tube, net weight 460g/tube
You Might Also Like
Low Cost 2-8mm Coffee Husk Hen Feed Press for Pakistan
Nice Design 90km Mileage Electric Scooter with Front Basket
A356 Aluminum Sand Casting Parts
3-Blade Aluminum Outboard Propeller
Mercedes Benz W639 Vito Viano Air Compressor 6393200204 6393......
Made in China Metal Zinc Alloy Soft Enamel Sport Medallion C......
10t 30t 40t Locosc Shear Beam Weighing Load Cell for Weighbr......
4.1kwh Lithium Battery Wall Mount LiFePO4 24V 160ah Deep Cyc......
A3 Size DTG Tshirt Jeans Jackets Printer for Dark Light Colo......
PVC Co-Extrusion Foam Board with Cheaper Price
Superior Popular Art Fineliner Drawing Pen with Water Proof ......