China Deutz Water Cooled Diesel Engine (226B Series), Find details about China Diesel Engine, Diesel Pump from Deutz Water Cooled Diesel Engine (226B Series)
Basic data | |||||||
| WEICHAI engine model | D226B-3D | TD226B-3D | TD226B-4D | TD226B-6D | TBD226B-6D | ||
| Number of Cylinders | 3 | 3 | 4 | 6 | 6 | ||
| Engine Displacement | L | 3.117 | 3.117 | 4.156 | 6.234 | 6.234 | |
| Type | in line,four stroke,direct injection,wet cylinder liner | ||||||
| Firing order | 1-3-2 | 1-3-2 | 1-3-4-2 | 1-5-3-6-2-4 | 1-5-3-6-2-4 | ||
| Bore | mm | 105 | 105 | 105 | 105 | 105 | |
| Stroke | mm | 120 | 120 | 120 | 120 | 120 | |
| Compression ratio | 16.4 | 15.5 | 15.5 | 15.5 | 15.5 | ||
| Aspiration | Natural | Turbocharged | Turbocharged | Turbocharged | Turbocharged | ||
| Crankshaft rotated direction(Face to flywheel) | Anti-colckwise | ||||||
| Staring Methord | Electronic Motor(DC24V or 12V) | ||||||
| cold start performance | without cold start aid | ºC | -10 | -10 | -10 | -10 | -10 |
| with cold start aid | ºC | -35 | -35 | -35 | -35 | -35 | |
| Permitted gradient longitudinal /cross | ° | 25/30 | 25/30 | 30/40 | 20/45 | 20/45 | |
| Engine only | Dry weight | kg | 495 | 505 | 545 | 714 | 735 |
| Wet weight | kg | 505.5 | 515.5 | 559.5 | 735 | 750 | |
| Engine with cooling package | Dry weight | kg | 520 | 530 | 570 | 760 | 775 |
| Wet weight | kg | 530 | 540 | 585 | 781 | 790 | |
| Performance | |||||||
| Prime Power | kW | 36 | 50 | 70 | 105 | 135 | |
| Speed at Prime Power | r/min | 1800 | 1800 | 1800 | 1800 | 1800 | |
| Standby Power | kW | 40 | 55.0 | 77 | 116 | 149 | |
| Speed at Standby Power | r/min | 1800 | 1800 | 1800 | 1800 | 1800 | |
| Fan Power Consumption | kW | 2 | 2 | 2 | 4 | 4 | |
| Mean piston speed at rated speed | m/s | 7.2 | 7.2 | 7.2 | 7.2 | 7.2 | |
| Torque at | Prime Power | N.m | 191 | 265.28 | 371.39 | 557.08 | 716.25 |
| Standby Power | N.m | 210.1 | 291.81 | 408.53 | 612.79 | 787.88 | |
| Effective mean presure at | Prime Power | kPa | 769.97 | 1069.40 | 1122.87 | 1122.87 | 1443.70 |
| Standby Power | kPa | 846.97 | 1176.34 | 1235.16 | 1235.16 | 1588.07 | |
| Max combustion pressure | MPa | ≤18.5 | |||||
| The lowest idle speed | r/min | 800±50 | 750±50 | 750±50 | 750±50 | 750±50 | |
| Steady Governing Rate | Mechanical type≤5%,Elcctronic≤1.5% | ||||||
| Noise | dB(A) | ≤105 | |||||
| Lubrication System | |||||||
| lubricating oil consumption | g/kWh | 0.65 | 0.67 | 0.66 | 0.67 | 0.67 | |
| Oil system capacity including filters | 8 | 8 | 9.75 | 14 | 14 | ||
| oil sump capacity | 7.25 | 7.25 | 9 | 13 | 13 | ||
| Oil change intervals/specifications | h | 250 | |||||
| Oil pressure at | Rated speed | kPa | 300-500 | ||||
| Idle speed | kPa | ≥100 | |||||
| Max permitted oil temperature | ºC | ≤120 | |||||
| Oil pump type | gear pump | ||||||
| Oil filter type | spiral paper element | ||||||
| Oil cooler type | Round plate type | ||||||
| Oil grade | SAE 15W-40 for temp above (-15 degC). SAE 5W-30 for temp below (-15degC).CD/CE/CF class oilRound plate type | ||||||
| Fuel System | |||||||
| Fuel Pump, Model | A Type or AD type | A Type or AD type | EP9 Type or P7100 type | EP9 Type or P7100 type | EP9 Type or P7100 type | ||
| Type of Governor: Mechanical / Electronic | optional | optional | optional | optional | optional | ||
| Steady Governing Rate | Mechanical type≤5%,Elcctronic≤1.5% | ||||||
| Fuel consumption | See test data or charactertic curve | ||||||
| Fuel feed pump type | plunger type | ||||||
| Fuel filter type | spiral paper element | ||||||
| Injection timing(B.T.D.C) | ° | 20.5±0.5 | 20.5±0.5 | 18±0.5 | 18±0.5 | 18±0.5 | |
| Injector type | multi-hole,valve needle | ||||||
| Injector opening pressue | MPa | 22 | 22 | 22 | 22 | 22 | |
| Solenoid, Make & Model | 1756ES | 1756ES | 1756ES | 1756ES | 1756ES | ||
| Voltage | V | 24 or 12 | 24 or 12 | 24 or 12 | 24 | 24 | |
| Pulling Current | When voltage is 24V ,≤25A.,When voltage is 12V ,≤50A | ||||||
| Holding Current | When voltage is 24V ,≤0.6A.,When voltage is 12V ,≤1.2A | ||||||
| Intake and Exhaust system | |||||||
| Air consumption at | Prime Power | kg/h | 156 | 229 | 304 | 421 | 421 |
| Standard Power | kg/h | / | 240 | 312 | 440 | 440 | |
| Max allowable Air intake restriction | kPa | ≤3 | |||||
| Max Environmental temperature | ºC | ≤45 | |||||
| Air filter type | spiral paper element | ||||||
| Max exhaust gas temperature after turbine | ºC | ≤600 | ≤550 | ≤550 | ≤550 | ≤550 | |
| Max allowable back pressure in exhaust line | kPa | ≤7 | |||||
| Exhaust gas flow at | Prime Power | kg/h | 163 | 238 | 318 | 441 | 441 |
| Standard Power | kg/h | / | 251 | 326 | 462 | 462 | |
| Cooling system | |||||||
| Max. Top tank temperature | ºC | ≤103 | |||||
| Heat rejection radiation from engine at Rated Powe | kW | / | 8 | 10 | 17 | 17 | |
| Heat rejection to coolant at Rated Power | kW | / | 15 | 18 | 35 | 35 | |
| Radiator ambient | ºC | ≤45 | |||||
| Recommended coolant | See Operatin Manual | ||||||
| Radiator cooling system type | closed circuit | ||||||
| Radiation area of ratiatior | m^2 | 18 | 20 | 20 | 30 | 30 | |
| Radiator core thickness | |||||||
| fan diameter | mm | Φ466 | Φ466 | Φ466 | Φ540 | Φ540 | |
| fan power consumption | kW | 2 | 2 | 2 | 4 | 4 | |
| fan flow | m^3/min | 172 | 172 | 172 | 220 | 220 | |
| coolant capacity | L | 15.7 | 15.7 | 19 | 27.6 | 27.6 | |
| coolant pump type | Centrifugal | ||||||
| Water Flow in Major Circulation | m^3/h | / | 3.8 | 4.5 | 8.1 | 8.1 | |
| Max external coolant system restriction | kPa | ≤12 | |||||
| Thermostat | Type | wax type | |||||
| strat to open | ºC | 75 | |||||
| fully open | 90 | ||||||
| Electrical system and others | |||||||
| Engine Driven Charging Alternator | Maker & Model | Prestolite Company | |||||
| Type | Three-phase AC,commutated and voltage regulated | ||||||
| Power | kW | 0.75 | |||||
| System Voltage | V | 28V | 28V | 28V | 28V | 28V | |
| Charging Amperes | A | 27A | 27A | 27A | 27A | 27A | |
| Starter System | Maker, Model | Prestolite | Prestolite | Prestolite | Prestolite | Prestolite | |
| Type | DC,selfexcitation | ||||||
| Voltage | 24V or 12V | 24V or 12V | 24V or 12V | 24V | 24V | ||
| Rated Power | 4kW | 6kW | 6kW | ||||
| Starting Current | 800~900A | 800~900A | 800~900A | 800~900A | 800~900A | ||
| Solenoid& Model | incorporated with starter | ||||||
| Relay, & Model | incorporated with starter | ||||||
| Protection Threshold Setting | Low Oil Pressure | 0.12MPa(When engine speed ≥650r/min) | |||||
| High Engine Temperature | ºC | 95 | 95 | 95 | 95 | 95 | |
| High Oil Temperature | ºC | 105 | 105 | 105 | 105 | 105 | |
| provisions on the flywheel housing for the installation of magnetic pickup | It is recommended to install the magnetic pichup at the flywheel gear ring with 0.4~0.8mm clearance between the pickup and the tip of the tooth | ||||||
| switches and sensors installation location | See the Engine Assembly Drawing | ||||||
| the Electrical drawing | See the Engine Electrical Drawing | ||||||
| Flywheel house stadard | SAE3 | SAE3 | SAE3 | SAE1 | SAE1 | ||
| Flywheel type stadard | SAE11.5 | SAE11.5 | SAE11.5 | SAE11.5 | SAE11.5 | ||
| Center of Gravity Location | see the engine outline drawing | see the engine outline drawing | see the engine outline drawing | see the engine outline drawing | see the engine outline drawing | ||