The design principle of the high speed press is to convert the circular motion to linear motion. The main motor is used to drive the flywheel and the clutch drives the gear, crankshaft (or eccentric gear), connecting rod, etc. To achieve the linear movement of the slider from the main motor to the movement of the connecting rod is a circular motion. There must be circular and linear movement between the connecting rod and the slider. There are roughly two types of mechanism in the design, one is a ball type, and the other is a pin type (cylindrical type). Through this mechanism, the circular motion Converts the linear motion of the slider.

Presses apply pressure on the material to plastically deform it to obtain the required shape and precision. Therefore, it is necessary to cooperate with a set of dies (separate upper and lower dies) to place the material between them and apply pressure to the machine to deform it. The reaction force caused by the force exerted on the material during processing is absorbed by the punch machine body.

High speed Metal button stamping press machine accuracy mainly effect by the below factor :

1, parallelism

2, verticality

3, the total gap
 

The high-precision punch not only produces a good product, but also has less damage to the mold, which not only saves the maintenance time of the mold, but also saves the maintenance cost.


Application

High speed eyelet press machine with Spheroidal graphite casting structure and dynamic balance which speed can reach SPM 900 in Mainland.Low Vibration, Low Noise, High Speed, Precision.Widely used in Garment accessories and electric connectors Automatic production such as metal button, eyelet, Led stand, terminal, saw blad, precision mobile phone accessories.
The configuration of High speed Metal button/eyelet/terminal/Saw blade stamping press machine:
Stept-1: Electrical falt Uncoiler FU-1000, Loading coil and uncoilling coil.
Stept-2: High speed roller feeder machine, Feed coil to press machine.
Stept-3: High speed press machine with tools, pressing to the end product.
What's more, we add the water tank, it can protect the mould . The function of water tank is cooling the mould and reduce the wastage of the mould.Our high speed press machine equiped the dynamic balancing device, it can make the machine steady when it works and prolong the service life of equipment.
Specification