CNC Stirrup Bender Sgw4-12b

Technical parameter

Product Description
1, the equipment is highly automated, and it can input hundreds of geometric processing graphics (or make graphics). Set the required processing dimensions arbitrarily, and you can choose any kinds of graphics.

2. Perfect combination of straightening, sizing, bending, hoop and cutting functions of steel bar, and truly realize the function of one machine with multiple functions.
3, the equipment needs only one person operation, the maximum capacity is 1800 hoop type / hour, which greatly improves the production efficiency and saves labor costs.
4, double line work can achieve efficient operation and improve production efficiency.
5. Using servo control system, servo motor and servo driver all adopt international famous brand, high precision, low failure rate, realize all automatic and uninterrupted bending process.
Design process characteristics

1. The equipment adopts the motion principle of servomotor + clean origin without any pollution to the environment.
2. The flexural telescopic action is equipped with two high-precision detection sensors to ensure the 100% reliability of the action.
3. no air pump and cylinder noise caused, save the maintenance time of pneumatic, at the same time no gas pump power consumption, can save two kilowatts per hour.
4. split type fixed knife design, no need to replace the whole, convenient maintenance, reduce cost; fixed cutter can be used two sides, improve the service life; four sides with a movable tool design, the service life increased 4 times, greatly reducing the cost.

Advantages of technical data

1. The shearing mechanism of the equipment is high speed mechanical shearing. Only 0.45S is needed for cutting at once, and three hundred thousand continuous high frequency and high working condition shearing tests are carried out.
2. It can meet the processing demand of three grade reinforcement(360Mpa), resistance to overload and high temperature resistance; the diameter range of steel bar: single line (4-12) mm, double line (4-10) mm.
3. The high precision servo drive with full closed loop control makes the length accuracy of the machining reach to + 1mm, and the angle accuracy reaches + 1 degree.
4. The bending mechanism can change the die, so that the minimum length of the stirrups that can be machined can reach 100mm.
5. high speed, no delay bending technology, the fastest can bend 1800 stirrups per hour.

Characteristics of control system

1. The cutting tool is made of high quality and toughness alloy die steel. The acceptance standard is in strict accordance with the international standard NADCA207, and the performance of the material exceeds the level of 50%-80% of the same kind of national standard.
2. Special heat treatment process control ensures that the cutting times of cutting tools are more than 100000 times, and the service life is 10 times higher than that of common die steels.
3. The traction wheel is the most new type of high alloy wear-resistant steel, the raw material standard is higher than the national standard 3 grades, the advanced vacuum heat treatment process is adopted, its wear resistance is higher than the domestic equal quality die steel 30%-50%, performance is 3-5 times of the ordinary die steel.

Process characteristics of parts processing
With a number of fully automatic CNC laser cutting centers, multiple automatic welding robots, hundreds of precise vertical and horizontal machining centers, high precision machining of parts and components, the exchange rate of one hundred percent.
Composition of equipment

1. Wire laying mechanism(1)Two sets of artillery line rack, each set can bear 2 tons. The L rack is horizontal and can be placed horizontally. After placing the steel bars, the wire rods are automatically delivered to the main engine.(2)the wire basket L is equipped with a set of wiring device, which can effectively prevent the steel bar from disorderly.
2. The traction straightening mechanism is composed of the external transverse and the internal vertical two straighteners, and the last two straightening wheels are divided into two parts, which can ensure the independent adjustment of the double wire straightening.
3. The shearing mechanism of the bending and shearing mechanism is composed of a fixed blade and a moving blade driven by an electric motor. The fixed blade is used to limit the direction of the steel bar and can be replaced rapidly within a few seconds. The mobile knife can be used on four sides, and the maintenance cost is low.
4. The electric control system adopts the industrial computer CNC control system with high accuracy, and it can adapt to the very bad working environment. With liquid crystal color display, through the touch screen input, we can design 32 stirrups and outline bars with any shape in the corners.

Product Pictures

Company Information

Our advantages

At YYTF Machinery Manufacturing, we offer quality products that are subjected to rigorous quality testing measures to ensure that only the best products in terms of quality and design reaches the market. We believe that our clients deal with us because of the quality that we provide and are fully aware of our responsibilities of catering to the various needs and requirements in this regard. 

We have adopted a system of total quality control to ensure that our products conform to strict industry standards and parameters. We use the quality imported parts and materials that are procured from reputed manufacturers. In addition, the different stages of production are closely monitored by our engineers to ensure complete satisfaction of the user of our products.

Timely Delivery

We take pride in our efficient production facilities, it enables us to fulfill different requirements of our clients within the stipulated time frame and as demanded by our clients.

if quality problems cause the user to fail to use the machine, after repair the user still fails to use the machine. We promise to replace the machine with new one after the machine is sold within one month. The expenses generated hereof shall be borne by manufacturer (subject to effective bill). Components and parts (non-consumable parts) are under replacement and warranty within 3 months. If the whole machine suffers major quality problems such as engine body, box, and gear fracture, the warranty period is 6 months. If quick-wear parts of the machine listed in the below table have problems, the quick-wear parts are not in scope of three guarantees. (Remark: effective period is subject to date of invoice.)
--------------------------------------------
We offer quality products that are subjected to rigorous quality testing measures to ensure that only the best products in terms of quality and design reaches the market.
--------------------------------------------
We have adopted a system of total quality control to ensure that our products conform to strict industry standards and parameters.
--------------------------------------------
We believe that our clients deal with us because of the quality that we provide and are fully aware of our responsibilities of catering to the various needs and requirements in this regard.
 

Always be imitated, Never be surpassed!

With 14 years experience, YongYiTongFeng insists in manufacturing small-sized construction machines. As a professional in this field, we pay more attention to quality than on variety. From a small workshop grow to be a professional manufacturer which gains RMB120,000,000.00 annual sales amount, our products cover Southeast Asia, South Asia, Middle East, South America, Africa, which brings us good reputation in global market. Being cautious and conscientious in small construction machines, with the spirit of spatiality and focus, we innovate and lead the steel processing market.
Packing & Delivery

 Product packaging and export.
We adopt wooden and iron box to pack steel rod cutter machine, better guarantee the safety and quality of products, we adopt multiple port, multiple exit point.Such as Shanghai, Qingdao, guangdong and other regions.Product transportation will be faster and more convenient.
covered with plastic bag -- protect machine from water.
plastic bag covered with stong waterproof bag -- double protect machine from
water and surface damage.
fix the machien into Iron shelf -- prevent from damage.
carton cover onto the iron shelf -- protect the privacy of clients' goods.

Category Advantage

We provide full category of cutting machine, bending machine, straightening machine, stirrup machine, bend-cutting combined machine.
-------------------------------------------------------------------------------------------------------------------------------------

Quality Advantage

Fast cost recovery. The High quality but Mid-range price, durable quality brings you continuous profits.
---------------------------------------------------------------------------------------------------------------------------------------

Technique Advantage

All machines are Fool-Type operation, new users could operate machine in few minutes.
----------------------------------------------------------------------------------------------------------------------------------------

Delivery Advantage

We set logistic center in large cities in China, assures you get machines at first time.
----------------------------------------------------------------------------------------------------------------------------------------

Service Advantage

We have after sales center in all around China, assures the quick reaction and solve problem at first time. Overseas after sales service available, workers could be sent to install machine and train your workers.