Products

Yongyitongfeng CNC Automatic Steel Bar Bending Machine

China Yongyitongfeng CNC Automatic Steel Bar Bending Machine, Find details about China Automatic Stirrup Bending Machine, Steel Wire Stirrup Bending Machine from Yongyitongfeng CNC Automatic Steel Bar Bending Machine

Model NO.
SGW4-12B
Straightening Motor
11kw
Bending Motor
5.5kw
Angle Deviation
Rebar ±1°
Bending Direction
Single Direction
Max Bending Angle
180°
Bending Speed
200mm*200mm, 14PCS/Min
Weight
2000kg
Trademark
YYTF
Transport Package
Iron and Wooden Covered
Specification
365*120*193cm
Origin
Xuchang, China
HS Code
8462219000
Model NO.
SGW4-12B
Straightening Motor
11kw
Bending Motor
5.5kw
Angle Deviation
Rebar ±1°
Bending Direction
Single Direction
Max Bending Angle
180°
Bending Speed
200mm*200mm, 14PCS/Min
Weight
2000kg
Trademark
YYTF
Transport Package
Iron and Wooden Covered
Specification
365*120*193cm
Origin
Xuchang, China
HS Code
8462219000
Yongyitongfeng CNC Automatic Steel Bar Bending Machine
Maxi Traction Speed110m/minDimension (mm)4290*1500*2050mm
Maxi Bending Speed1100° /sPneumatic Pressure≥ 0.6Mpa
Angle Error±1°Voltage380V
Length Error±1mmPower Consumption6-8KVA
Maxi Bending180°Power (KW)26kw
Bend Shaft Diameterφ65mmWorking Temperature-5°~40°
Bend Shaft Height From The Ground1240mmWeight2580KG
Single Wire (mm)4-12mmThe Longest Diagonal Length of Stirrup1400mm
Double Wire (mm)4-10mmThe Shortest Diagonal Length of Stirrup150mm
Machine including
Yongyitongfeng CNC Automatic Steel Bar Bending Machine
Product Description
1, the equipment is highly automated, and it can input hundreds of geometric processing graphics (or make graphics). Set the required processing dimensions arbitrarily, and you can choose any kinds of graphics.
2. Perfect combination of straightening, sizing, bending, hoop and cutting functions of steel bar, and truly realize the function of one machine with multiple functions.
3, the equipment needs only one person operation, the maximum capacity is 1800 hoop type / hour, which greatly improves the production efficiency and saves labor costs.
4, double line work can achieve efficient operation and improve production efficiency.
5. Using servo control system, servo motor and servo driver all adopt international famous brand, high precision, low failure rate, realize all automatic and uninterrupted bending process.
Yongyitongfeng CNC Automatic Steel Bar Bending Machine
Design process characteristics
  1. The equipment adopts the motion principle of servomotor + clean origin without any pollution to the environment.
  2. The flexural telescopic action is equipped with two high-precision detection sensors to ensure the 100% reliability of the action.
  3. no air pump and cylinder noise caused, save the maintenance time of pneumatic, at the same time no gas pump power consumption, can save two kilowatts per hour.
  4. split type fixed knife design, no need to replace the whole, convenient maintenance, reduce cost; fixed cutter can be used two sides, improve the service life; four sides with a movable tool design, the service life increased 4 times, greatly reducing the cost.
Advantages of technical data
  1. The shearing mechanism of the equipment is high speed mechanical shearing. Only 0.45S is needed for cutting at once, and three hundred thousand continuous high frequency and high working condition shearing tests are carried out.
  2. It can meet the processing demand of three grade reinforcement(360Mpa), resistance to overload and high temperature resistance; the diameter range of steel bar: single line (4-12) mm, double line (4-10) mm.
  3. The high precision servo drive with full closed loop control makes the length accuracy of the machining reach to + 1mm, and the angle accuracy reaches + 1 degree.
  4. The bending mechanism can change the die, so that the minimum length of the stirrups that can be machined can reach 100mm.
  5. high speed, no delay bending technology, the fastest can bend 1800 stirrups per hour.
Characteristics of control system

The cutting tool is made of high quality and toughness alloy die steel. The acceptance standard is in strict accordance with the international standard NADCA207, and the performance of the material exceeds the level of 50%-80% of the same kind of national standard.Yongyitongfeng CNC Automatic Steel Bar Bending Machine
  1. Special heat treatment process control ensures that the cutting times of cutting tools are more than 100000 times, and the service life is 10 times higher than that of common die steels.
  2. The traction wheel is the most new type of high alloy wear-resistant steel, the raw material standard is higher than the national standard 3 grades, the advanced vacuum heat treatment process is adopted, its wear resistance is higher than the domestic equal quality die steel 30%-50%, performance is 3-5 times of the ordinary die steel.
Process characteristics of parts processing

With a number of fully automatic CNC laser cutting centers, multiple automatic welding robots, hundreds of precise vertical and horizontal machining centers, high precision machining of parts and components, the exchange rate of one hundred percent.

Factory and office

Yongyitongfeng CNC Automatic Steel Bar Bending Machine
Packge

Yongyitongfeng CNC Automatic Steel Bar Bending Machine
Main Products

Yongyitongfeng CNC Automatic Steel Bar Bending Machine
Contact

You Might Also Like