China High Quality Blown Film Injection Molding PP Polypropylene Plastic Particles, Find details about China PE, Virgin PP Granules from High Quality Blown Film Injection Molding PP Polypropylene Plastic Particles
Number | Project | Unit | H40S | Test value | Test Methods | |
1 | Melt mass-flow rate(MFR) | Nominal value | g/10min | 37 | 37.3 | GB/T 3862 |
Deviation | ±37 | |||||
2 | Isotactic index | % | >=96.0 | 97.51 | GB/T 2412 | |
3 | Particle appearance | Color grain | Pc/kg | <=5 | 0 | SH/T 1541-2006 |
Black grain | Pc/kg | 0 | 0 | |||
Large and small grains | g/kg | <=100 | 0.1 | |||
Snake skin grains and trailing grains | Pc/kg | report | 25 | |||
4 | Impurities and others | Pc/kg | no | no | SH/T 1541-2006 | |
5 | Ash | % | <=0.030 | 0.014 | GB/T 9345.1 | |
6 | Tensile properties | Tensile modulus of elasticity(Et) | MPa | >=1200 | 1250 | GB/T 1040 |
Tensile yield stress(σ y) | MPa | >=30.0 | 30.9 | |||
Tensile stress atbreak(σ B) | MPa | >=8.0 | 20.7 | |||
Nominal tensile strain at break(ε tB) | % | >=200 | 566 | |||
Test conclusion | Qualified |