Products

AISI H11/DIN 1.2343/JIS SKD6 Tool Steel Bar

China AISI H11/DIN 1.2343/JIS SKD6 Tool Steel Bar, Find details about China AISI H11 Tool Steel, 1.2343 Tool Steel Bar from AISI H11/DIN 1.2343/JIS SKD6 Tool Steel Bar

Model NO.
KM-244
Special Use
Mold Steel, Cold Heading Steel
Size
130mm-1000mm (Optional)
Length
2m,3m,5.8m, 6m, 8m or as Required.
Delivery Time
7-30 Days
Loading Port
Shanghai
MOQ
3 Tons
Certificate
ISO, BV, SGS, Mill Test Certificate
Packaging Detail
Standard Sea-Worthy Package
Surface
Bright, Black
Price Term
Ex-Work, Fob, CFR, CIF, etc.
Specifications
Flat Bar, Round Bar, Angle Bar, Square Bar
Trademark
Kingmetal
Transport Package
Standard Sea-Worthy Package
Specification
130mm-1000mm (optional)
Origin
China (Mainland)
Model NO.
KM-244
Special Use
Mold Steel, Cold Heading Steel
Size
130mm-1000mm (Optional)
Length
2m,3m,5.8m, 6m, 8m or as Required.
Delivery Time
7-30 Days
Loading Port
Shanghai
MOQ
3 Tons
Certificate
ISO, BV, SGS, Mill Test Certificate
Packaging Detail
Standard Sea-Worthy Package
Surface
Bright, Black
Price Term
Ex-Work, Fob, CFR, CIF, etc.
Specifications
Flat Bar, Round Bar, Angle Bar, Square Bar
Trademark
Kingmetal
Transport Package
Standard Sea-Worthy Package
Specification
130mm-1000mm (optional)
Origin
China (Mainland)

AISI H11 /DIN 1.2343 /JIS SKD6 tool steel bar

1.Supply Form & Size & Tolerance

Supply FormSize(mm)ProcessTolerance



Round		Φ6-Φ100Cold DrawnBright/BlackBest H11

Φ16-Φ350
Hot Rolled		Black-0/+1mm
Peeled/groundBest H11

Φ90-Φ1000
Hot Forged		Black-0/+5mm
Rough Turned-0/+3mm

Flat/Square/Block		Thickness :120-800
Hot Forged		Black-0/+8mm
Width:120-1500Rough Machined-0/+3mm

Remark:Tolerance can be customized as per requests

2.Chemical Composition

StandardGradeCSiMnPSCrVMo
ASTM A681H110.35-0.450.8-1.250.2-0.60.030.034.75-5.50.3-0.61.1-1.6
DIN ISO 49571.23430.28-0.350.8-1.20.1-0.40.030.032.7-3.20.4-0.71.1-1.5
JIS G4404SKD60.32-0.420.8-1.20.50.030.034.5-5.50.3-0.51.0-1.5
BS 4659BH110.32-0.400.85-1.150.40.350.354.75-5.250.3-0.51.25-1.75

3.Physical Property

Temperature20°C200°C400°C600°C
Density,kg/m37800775077007600
Modulus of elasticity,Mpa210000200000180000140000
Coefficient of thermal expansion from 20°C,per °C-11.6 x 10^-612.4 x 10^-613.2 x 10^-6
Thermal conductivity,W/m °C-303031

4. Mechanical Property

Hardness,HRC4546.548.5
Tensile strength,Mpa145015801680
Yield strength Rp 0.2,Mpa124013401410
Elongation A5 ,%131312
Reduction in area Z,%656564

5.Forging

H11 tool steels are forged at 900- 1120°C .Reheat is necessary when temperature below 900°C ,AISI H11 steel  should be cooled as slowly as possible in the furnace,annealing is recommended after forged.

6.Stress Relieving

Stress relieving to remove machining stresses should be carried out by heat to 650°C, holding for one hour at heat, cooling in the furnace. This operation is performed to reduce distortion during heat treatment.

7.Annealing

Heating slowly and uniformly to 845~900ºC, furnace cooling to 540ºC at a rate 10~20ºC per hour, obtain hardness HB 229 max.

8.Hardening

Harden from a temperature of 1000-1040ºC followed by air, oil quenching or warm bath quenching 500-550ºC
C. Hardness after quenching is 50-56 HRC.

9.Tempering

Temper at 540°C to 650°C for Rockwell C hardness of 54 to 38.Temper minimum twice with intermediate cooling to room temperature. Holding time at temperature is minimum 2 hours.

Tempering,ºC100200300400500550600650700
HRC535252525452483830
Rm,N/mm218451790179017901910179015701200970

10.Application

AISI H11 is widely usd for highly stressed hot work tools,typical use are:
1.Extrusion Industry: Dies and Contatiner for Extrusion
2.Forging Industry: Forming Dies, Press Dies
3.Die Casting Industry: Dies for Die-Carbide
4.Aircraft Industry: Landing Gears, Arrester Hooks

 

AISI H11/DIN 1.2343/JIS SKD6 Tool Steel Bar
AISI H11/DIN 1.2343/JIS SKD6 Tool Steel Bar
AISI H11/DIN 1.2343/JIS SKD6 Tool Steel Bar



 

You Might Also Like