Products

Food Grade Liquid Addition Silicone Rubber for Insole Making

China Food Grade Liquid Addition Silicone Rubber for Insole Making, Find details about China Food Grade Silicone, Silicone from Food Grade Liquid Addition Silicone Rubber for Insole Making

Model NO.
6210, 6215, 6220, 6225, 6230
Trademark
XD silicone
Specification
10KG, 20KG, 40KG, 50KG
Origin
Beijing
HS Code
3910000000
Model NO.
6210, 6215, 6220, 6225, 6230
Trademark
XD silicone
Specification
10KG, 20KG, 40KG, 50KG
Origin
Beijing
HS Code
3910000000
XD6210,XD6220,XD6230 Food-grade liquid silicone series are suitable for baking molds and trays, ice cubes, pouring butter, chocolate and other applications for food production. The ingredients in these products comply with FDA food contact certification. Liquid silicone can accurately reproduce the complex patterns of all kinds of food to produce beautiful food.

Appilications: 
  • candy molds
  • gummy molds
  • CBD or THC gummy molds
  • ice molds and trays
  • chocolate molds
  • butter molds
  • cake decorating and fondant molds
  • gaskets and seals for food-processing environments
Technical data sheet:
Model62106215622062256230
Mixing ratio (A:B)1:11:11:11:11:1
Hardness (Shore A)≥1015202530
Tear-strength (kgf/c m²)≥1618202122
Viscosity (A/B mixed 25°C mpa.S)8000±20008000±200010000±200010000±200010000±2000
Shrinkagerate (%)≤0.10.10.20.10.1
Elongation(%)500480450450400
 
Features:
Food grade quality with nontoxic
Excellent fluidity, high tear and tensile strength
High duplication times repeated use, easy to demould
High temperature resistance and cure can be accelerated by heat

How to use:
1.A and B must be mixed evenly into a clean plastic or metal container, The bottom and walls of the container must be scraped well to ensure that the silicone is mixed with the curing agent.

2.The pre-operation time of the mixed is 30-40 minutes at room temperature, and the product prototype is poured by vacuum defrosting.The product can be cured completely at room temperature of 3-4 hours and heated at 80-120ºC for 30 minutes.

3. When pouring or brushing mold for medium or large products, it is recommended to pour or brush 2-3mm thick silica gel on the surface of the product to fully and completely contact with the prototype.

4.At  25ºC, A/B is fully mixed and stored safely for 30-40 minutes.The higher the temperature, the shorter the storage time.

Package: 10KG, 20KG, 200KG or according to customer requirements.

Food Grade Liquid Addition Silicone Rubber for Insole Making

You Might Also Like