China 20FT 26cbm Bulk Cement Powder Tank Container Without Diesel Engine&Air Compressor, Find details about China Cement Tank Container, Cement Bulk Container from 20FT 26cbm Bulk Cement Powder Tank Container Without Diesel Engine&Air Compressor
Items | Unit | Parameter | ||||
External dimension(LxWxH) | mm | 20' X 8' X 9' 6" | ||||
Internal size of tank | mm | 6000 x 2400 | ||||
Tank volume | m³ | 26 | ||||
Load capacity | m³ | 21.5 | ||||
Design pressure | Mpa | 0.2 | ||||
Test pressure | Mpa | 0.3 | ||||
Design temperature | ºC | 0 to +70 | ||||
Max. gross weight | kg | 30480 | ||||
Tare weight | kg | 4,080 (estmated) | ||||
Loading weight | kg | 26400 | ||||
Stacking weight.(For 1.8g) | kg | 192000 | ||||
Discharge rating | t/min | cement: 1.0 ~ 1.3 | ||||
Remnant ratio | kg | cement: about 100kg | ||||
Materials | ||||||
3.1 Main materials usde for the container shall be of the best quality conforming to the requirements of this specification society. | ||||||
3.2 Materials of the main parts | ||||||
Tank ahell Dish ends | Q345B -GB/T 1591-2008 Yield Point: 35kg/m Tensile Strength: 50kg/m | |||||
Walk way Internals | Structural steel: SS41 Yield Point: 25kg/m Tensile Strength: 41kg/m | |||||
Corner posts End rails Tank- to-end linkers End corner supports Tilted panels and ribs | Q345B ISO/R1161 Yield Point: 35kg/m Tensile Strength: 50kg/m | |||||
Corner fitting | Casted Weldable Steel: SCW49 Yield Point: 28kg/m Tebsile Strength: 49kg/m | |||||
Pipe(Seamless Pipe) | 20-GB8163 Yield Point: 25kg/m Tensile Strength: 41kg/m | |||||
Aeration membrane | Synthetic fabric | |||||
Serews Bolts | Structural steel: SS400(Q235) Yield Point: 25kg/m Tensile Strength: 41kg/m | |||||
Standard and Regulations | ||||||
This container will comply with the following requirements and regulations,unless otherwise mentioned in this specification. | ||||||
ISO/TC-104 | ||||||
ISO668 - Series 1 freight containers - classification external dimension and Rating. ISO6346 - Series 1 freight containers - coding,identification and marking. ISO830 - Terminology in relation to freight container. ISO11611 - Series 1 freight containers - corner fittings specification. ISO1496/3(Edt 1995) - Tank container - test specification. | ||||||
T.I.R Certification | ||||||
All the tank containers will be certification and complied with "The Convention on the International Transport of Goods under the cover of T.I.R Carnets."or "The Customs Convention for the Safe Containers". | ||||||
C.S.C Certification | ||||||
All the containers will be certified and complied with the requirements of the "Internations Convention for the Safe Containers". | ||||||
Classification Society | ||||||
All the containers will be certified for desgin type and individually inspected by classification society. | ||||||
ASME Standard:American Society of Mechanical Engineers / DIV.1 of the part VIII(where applicable). | ||||||
Handling | ||||||
These tank containers will be constructed to be capable of being handled without any permanent deformation under the following conditions: | ||||||
Lifting,full or empty,at top corner fittings vertically by means of spreaders fixed with hooks,shackles or twist-locks. | ||||||
Lifiting full or empty,at bottom corner fittings using slings with terminal |
ITEM NAME | WARRANTY | ITEM NAME | WARRANTY | |||
MAIN FRAME | FRAME | 1 YEAR | RUNNING GEAR | AXLE | 6 MONTHS | |
SUSPENSION | 6 MONTHS | AXLE BEARING | 3 MONTHS | |||
KING PIN | 1 YEAR | WHEEL HUB | 3 MONTHS | |||
BALANCE ARM | 3 MONTHS | TIRE | 6 MONTHS | |||
ITEM NAME | WARRANTY | ITEM NAME | WARRANTY | |||
BRAKING DEVICE | BRAKE DRUM | 3 MONTHS | SUPPORT DEVICE | LANDING GEAR | 6 MONTHS | |
BRKE CHAMBER | 3 MONTHS | SPARE WHEEL CARRIER | 6 MONTHS | |||
AIR RESERVOIR | 6 MONTHS | |||||
ITEM NAME | WARRANTY | |||||
OTHERS | LEAF SPRING | 3 MONTHS | ||||
BRAKE CHAMBER DIAPHRAGM | 3 MONTHS | |||||
EMERGENCY RELAY VALVE | 3 MONTHS | |||||
BRAKE SHOE | 3 MONTHS | |||||
RELAY VALVE | 3 MONTHS |