Features:
A. Stable performance with advanced PLC.
B. Conveying preforms automatically with conveyor.
C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
F.No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
H. Strong clamping force with high pressure and double crank links to lock the mold.
I. Two ways of operating: automatic and manual.
J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
L. Contamination is avoided for the bottle body.
M. Ideal effect of the chilling with the chilling system.
N. Easy installation and starting
O. Low rejection rate: less than 0.3percent.
PET Bottle Making Machine can blow the maximum capacity of the products is 2L. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics ,wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
(1).High Automation.PET bottle making machine.
(2).High Intelligence :The PET making machine can be controlled through touch screen and running status is shown on it.
(3).High Quality: Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
(4).High Speed:2000BPH(2-cavity), 3000BPH(3-cavity),4000BPH(4-cavity), 6000BPH(6-cavity).
(5).No Contamination: Closed production zone, good self-lubrication system avoid contamination.
(6).Low Cost :Low consumption of electricity, air and water.PET bottle making machine.
(7).High Transparency : Easy maintenance, absolute safely, visual inspection, low noise.
1.Q:Are you a factory or trading company?
A:We are a factory
2.Q:Where is your factory located? How can I visit there?
A:Our factory is located in Taizhou City, Zhejiang Province, China, about 3 hours train from Shanghai by fast train. All our clients, from home or abroad, are warmly welcome to visit us!
3.Q:What is the payment of your machines ?
A:30% by T/T as down payment, 70% by T/T or L/C before shipment
4.Q:What is the delivery of your machines ?
A:30 days after down payment and drawing comfirmed
5.Q:How does your factory do regarding quality control?
A:Quality is priority. ZS People always attach great importance to quality controlling from the beginning to the end.
6.Q:How about after sales service?
A:One year spare parts for easy broken parts, long term technical support, as customer demand, sending technicians to custoemr site for instatllion or trainning. at importance to quality controlling from the beginning to the end.
| Item | YCQ-1L-4E |
| cavity | 4 |
| capacity (b/h) | 4000-5000 |
| MAX.bottle volume (L) | 1 |
| bottle mouth external diameter(mm) | 28-38 |
| bottle diameter (mm) | 100 |
| bottle Max. height (mm) | 330 |
| light tube quantity | 32 |
| light tube power (KW) | 1.25 |
| Max.heating power (KW) | 40 |
| system installed power(KW) | 43 |
| working power(KW) | 30 |
| workig pressure(Mpa) | 0.7-0.9 |
| low pressure gas consumption(m3/min) | 1.6 |
| bottle blowing pressure(Mpa) | 2.5-3.5 |
| high pressure gas consumption(m3/min) | 3 |
| chilled water pressure(Mpa) | 0.5-0.6 |
| chilled water temperature range(ºC) | 10 |
| chilled consumption(Kcal/h) | 8000 |
| chilled water flow(L/min) | 88 |
| equipment outline dimensions(m) | 4.5*1.6*1.9 |
| machine weight(t) | 3 |
Technology Advantage
l. Special design,high rigid compound die structure
2. Wide adaptability, suitable for every type mould thickness
3. Adjust convenience
4. No mould rolling out
5. More energy conservation,no need much air supply
6. High burnish principal axis, with very precise polishing, light action and low noise.
7. Short mould stroke,quick action
8. All ZG45 casting, with long timing process,very small transformation,can meet your precise request 100%
9. Hig dead-weigh, ensure the steady during the opeartion
Our Service
After-sales service
1.we will provide the bill of load on time to make sure you can get the machine quickly
2.when you finish the Preparation conditions ,our engineer will go to your factory to install the machine ,and give you the operating manual ,and train your employee until they can operate the machine well.
3.we provide one year warranty with spare parts free.
The sample service
1.we can send you the video of the running machine.
2.you are welcome to come to visit our company,and see the machine running in our factory,we can pick you up from the station near our city.
3.If we get the permission of the customer who has brought the machines from us ,we can tell you their contact imformation,you can go to vist their factory.
Customized service
1.we can design the machines according your requirements(materil ,power,filling type,the kinds of the bottles,and so on).
2.at the same time we will give you our professional suggestion,as you know,we have been in this industry for many years.
well-known for its fine quality for plastic bottle blowing machine
After sales service
1> Find our products through ecengmachinery.en.made-in-china.com Alibaba,GlobalMarket,Made in China,Globalsources,Tradekey.
2>After one year , we can help you to maintain the machine and the accessories are provided only one the cost price.
3>Every 3 year , we can help to overhaul the machine freely(labor).
4>Free production technology and process configuration.
5> We can help you to design the product line , workshop and provide turn-key project.
6>Installation: Experts' team to buyer's country after confirmation that the goods arrived in site and civil works completed get ready for installation. Funds for trip need to be payed by client and extra salary $60/day during the engineer's journey.
7>Warranty: One year from the date from the date of Installation or acceptance of the Plant whichever comes first.
Free Spare Parts : Digital instrument, Sealing, Stretching cylinder seal ring, Mould-adjustment wrench, Furnace temperature table, Furnace heating tube and other relative vulnerable part .
Transportation:
It is located in the beautiful port city of Zhangjiagang with convenient traffic; it's about 150 km away from Shanghai.
Products:
PVC/HDPE/PP-R pipe extrusion line, PVC & WPC profile extruding line and plastic sheet production lines with the relative auxiliary machine, PE film/ PET bottles recycling line and pelletizing lines.
Market:
Our products have been exported to Middle East, Southeast Asia, South America and Europe etc. We received the universal confirmation and trust from our customers except of the precious experience.
Idea:
Abide by the logos of "Sincerity, Development, innovation, Win-Win" constantly, we are honorable to cooperate with friends at home and abroad by providing the high quality products, technology and service!