Products

PU Foam Pipe Insulation Resin Material Polyol and Isocyanate Polyurethane Foam

China PU Foam Pipe Insulation Resin Material Polyol and Isocyanate Polyurethane Foam, Find details about China Polyurethane Foam, Resin Material from PU Foam Pipe Insulation Resin Material Polyol and Isocyanate Polyurethane Foam

Model NO.
SDB10D-Z01
Plastic Forming Method
Injection
Color
Yellow
Core Density
≥60 Kg/M3
Radial Compressive Strength
≥0.3MPa
Initial Thermal Conductivity(50°c)
≤0.033W/(M•K)
Close Cell Content
≥88%
Water Absorption
≤10%
Appearance
Pale Yellow Liquid.
Specific Gravity at 25°c
1.10±0.10 g/cm3
Viscosity at 25°c
300±100 Cps
Shelf Life
12 Months
Trademark
shunda
Transport Package
Iron Drum
Specification
200kg
Origin
China
HS Code
39072090
Model NO.
SDB10D-Z01
Plastic Forming Method
Injection
Color
Yellow
Core Density
≥60 Kg/M3
Radial Compressive Strength
≥0.3MPa
Initial Thermal Conductivity(50°c)
≤0.033W/(M•K)
Close Cell Content
≥88%
Water Absorption
≤10%
Appearance
Pale Yellow Liquid.
Specific Gravity at 25°c
1.10±0.10 g/cm3
Viscosity at 25°c
300±100 Cps
Shelf Life
12 Months
Trademark
shunda
Transport Package
Iron Drum
Specification
200kg
Origin
China
HS Code
39072090
DESCRIPTION
SDB10D is a kind of blend polyol used for pipe insulation system for city heating or cooling. When it combined with isocyanate(PM200) leads to the formation of rigid polyurethane foam by using PU injection foam equipment .The foam formed has the characteristics as following:
  1. The thermal conductivity is low, which can meets the requirements of city heating and energy saving.
  2. Service life of the foam is very long, over 30 years.
  3. High temperature resistance and good dimensional stability of the foam, the highest temperature range is 140 ºC.
TYPICAL PHYSICAL PROPERTIES
Physical ProperitiesTest MethodMetricValue
Core DensityGB/T 6343-2009kg/m3≥60 
Radial Compressive StrengthGB/T 8813-2008MPa≥0.3
Initial Thermal Conductivity(50°C)GB/T 10294-2008W/(m·K)≤0.033
Close Cell ContentGB/T 10799-2008%≥88
Water AbsorptionGB/T 8810-2005%≤10
Air bubblesGB/T 29047mm1/3Insulation thickness.
Average cell size.GB/T 29047mm≤0.5
Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products, the data are not legally binding.

Other unmentioned matters and TDS&MSDS.Please visit our official website shundapu.en.made-in-china.com
Or please contact us for information:
 
 

PU Foam Pipe Insulation Resin Material Polyol and Isocyanate Polyurethane Foam
PU Foam Pipe Insulation Resin Material Polyol and Isocyanate Polyurethane Foam
PU Foam Pipe Insulation Resin Material Polyol and Isocyanate Polyurethane Foam
PU Foam Pipe Insulation Resin Material Polyol and Isocyanate Polyurethane Foam

You Might Also Like