Products

CDMA 800m 20W 95dB Wireless Band Selective RF Signal Amplifier Booster Repeaters

China CDMA 800m 20W 95dB Wireless Band Selective RF Signal Amplifier Booster Repeaters, Find details about China Repeaters, Amplifier from CDMA 800m 20W 95dB Wireless Band Selective RF Signal Amplifier Booster Repeaters

Band
CDMA 800m
Output Power
1-20W
Gain
95±3dB
Max. Alc Level
25dB
Vswr
1.5
Group Delay
5us
Impedance
50 Ohms
Power Supply
AC110V/220V
Transport Package
Cartons and Wood Pallet
Origin
Fujian, China
HS Code
8543709200
Band
CDMA 800m
Output Power
1-20W
Gain
95±3dB
Max. Alc Level
25dB
Vswr
1.5
Group Delay
5us
Impedance
50 Ohms
Power Supply
AC110V/220V
Transport Package
Cartons and Wood Pallet
Origin
Fujian, China
HS Code
8543709200
CDMA 800M 20W 95dB Wireless Band Selective RF Signal Amplifier Booster Repeaters

OVERVIEW                                                                               
Wireless Band Selective Repeaters are cost effective and reliable solutions designed to extend and improve the coverage area of UMTS communication systems. LTE Band Selective Repeaters amplifies in both directions, uplink and downlink a continuous bandwidth, factory tuned. The presence of a Repeater provides to the 4G communication system with a high channel occupancy rate, since coverage is extended beyond site coverage. Typical applications of this line of boosters are indoor situations such as tunnels, buildings, subways, and outdoor scenarios such as stadiums, rural areas and dense urban areas. 
CDMA 800m 20W 95dB Wireless Band Selective RF Signal Amplifier Booster Repeaters
CDMA 800m 20W 95dB Wireless Band Selective RF Signal Amplifier Booster Repeaters
CDMA 800m 20W 95dB Wireless Band Selective RF Signal Amplifier Booster Repeaters

RF Specifications                                                                    
ItemSpecificationRemark
Up-LinkDown-Link
Frequency range1850-1910 MHz1930-1990 MHz 
Band width (-3dB)available upon request 
Output Power30-37 dBm(1-5W)30-43 dBm(1-20W)(Customized)
Nominal Gain95±3dB(Customized)
Gain Flatness≤ 3dB (p-p) 
MGC ( Step Attenuation )≥ 31dB / 1dB step 
Max. ALC level≥25dB 
Intermodulation attenuation≤-45dBc 
Spurious emission9kHz-1GHz≤-36dBm 
1GHz-12.75GHz≤-30dBm 
Noise Figure.≤5dB(at maximum output power) 
Group delay≤5us 
VSWR≤1.5 
Frequency stability≤ 0.01ppm 
 SystemSpurious Emission MaskMeet 3GPP TS 25.143 ( V 6.2.0 ) 
Modulation Accuracy≤ 12.5% 
Peak Code Domain Error≤ -35dB@Spreading Factor 256 
Input inter-modulation Meet 3GPP TS 25.143 ( V 6.2.0 ) 
ACRR≥ 30dBc/30KHz @ ± 5MHz 
≥ 50dBc/30KHz @ ± 10MHz		 
RF ConnectorsN - female 
Impedance50 Ohms 
      
 
Supervising Specifications                                                          
Self diagnostic platformMicroprocessor based
AlarmsYes, amplifiers status, power amplifiers status, power supply failure, battery backup failure, temperature, AGC, RF overload, poor antenna isolation.
Local management and supervisingBuilt-in gain adjustment interface and alarms/status LEDs, PC access via RS-232 (OMS)
Remote management and supervisingRemote access via wireless GSM SMS modem OR GPRS Modem OR Ethernet, option RC (OMS)
 

Application: 
Wireless signal repeater is used to expand signal coverage of fill signal blind area where signal is weak or unavailable.
 
Outdoor: Airports, Golf Courses, Tourism Regions, Villages, Highway, Tunnels, Mining Districts etc.
Indoor: Hotels, Exhibition Centers, Shopping Malls, Gymnasium, Basements, Offices, Factory, Hospital,Entertainment, Packing Lots etc.

CDMA 800m 20W 95dB Wireless Band Selective RF Signal Amplifier Booster Repeaters

Shipping                                             
1. We will send the goods within 10-15 days after full payment has been confirmed, detail shipping time depend on order quantity.
2. Multiple delivery method for selection, by air, by land, by sea or by expression courier.
CDMA 800m 20W 95dB Wireless Band Selective RF Signal Amplifier Booster Repeaters

Company information:
Our company, Quanzhou L-TEL Communication Equipment Co.,Ltd. was founded in 2007, located in the technology economically developed city of Quanzhou, Fujian,China. We are focusing on the development, production and sales of a variety of mobile communication repeaters, signal amplifiers and function modules. We are a professional manufacturer specializing in perfect solutions for wireless signal coverage for a variety of occasions. 
CDMA 800m 20W 95dB Wireless Band Selective RF Signal Amplifier Booster Repeaters

Our present manufacturing service:
1) GSM/CDMA/WCDMA/IDEN/DCS/PCS/LTE/TETRA/DMR/VHF/UHF and other Repeaters (PICO Repeater/ Dual band Repeater/ Fiber Optical repeater/ Band or frequency selective repeater/ Frequency Shifting repeater) and series Trunk Amplifiers.
 
2) Functional Units: Low-noise Power Amplifier Integrative Module, Low-noise Band Selective Power Amplifier Integrative Module, Power Amplifier, Low-noise Amplifier, Channelized Device, Band Selective Device, Band Selective Frequency Shifting Device.
 
3) All kinds of accessories: Antenna/ Filter/Power divider/Connector/ Cable/Coupler/Combiner/Duplexer.
 
4) OEM/ ODM is available.

For more informations,please feel free to contact with us!!!


 

You Might Also Like