China Epoxy Polyester Electrostatic Spray Ral/Pantone Color Thermosetting Powder Coating Paint, Find details about China Thermosetting Powder Coating, Ral Powder Coating from Epoxy Polyester Electrostatic Spray Ral/Pantone Color Thermosetting Powder Coating Paint
Epoxy Polyester Electrostatic Spray Ral/Pantone Color Thermosetting Powder Coating Paint
HOT SALE COLORS
1.RAL & Pantone with smooth glossly ,matt ,wrinkle,sandy ,hammer ,metallic etc.
2.Chrom effect , Wooden effect , Glow in the dark Powder ,Candy Color Powder ,MDF powder etc.
Powder Coating-Interior Series
The indoor powder coating is widely applied on various indoor metal products and metal products which have high demand for corrosion resistance, flexibility and electrical insulation such as household appliances, radiator, fitness equipment, industrial equipment, logistics shelves, oil and gas pipelines,insulating copper/aluminum bars and wires, etc.
Powder Coating-Exterior Series
It has excellent weathering resistance and salt spray resistance.It's widely applied on various
Outdoor metal products such as agricultural machinery, auto parts, courtyard fence, fitness equipment, industrial equipment, outdoor lights, air-conditioning outer machine, architecture materials, automobile wheel-hub,auto topcoat and etc
AVERAGE COVERAGE
8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)
PACKING INFORMATION
Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.
CURING CONDITIONS
Coating gun:
COLORS AVAILABLE
GENERAL TYPES
Textures include sand grain, hammer, silk pattern, sand textured, marble,metallic, multi-color.
PHYSICAL PROPERTIES
STORAGE AND TRANSPORT
Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used.
HEALTH AND SAFETY
Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating
Mechanical property | ||
Testing items | Standards and methods | Inspecting index |
Impact strength | GB/T1732-1993, AS3715 2.8 | >50kg/cm |
Bending resistance | GB/T1185-88, AS1580 402.1, ISO9227 | Pass 2-5 millimeters |
Adhesion CHECKED TEST | GB/T9286-88,2mm Cross cut, ISO2409 | Pass100/100, passes 0 levels |
Cupdrawing:Erichsen, ISO1520 | Erichsen, ISO1520 | Pass 3-7 millimeters |
Pencil hardness | GB/T6739-86, Mitsubishi | Pass H-2H |
Chemical resistance and weather resistance | ||
Salt spray test | GB/T1771-91,500 hours | The cross section of corrosion less than 2MM |
Hot and damp resistance test | GB/T17740-79(89),1000 hours | Without air bubbles, loses the light slightly |
Acid resistance | 10% CH3COOH, 240 hours | Without air bubbles, the surface without damage |
Alkali resistance | 10% NaOH, 240 hours | Without air bubbles, the surface without damage |
Heat resistance | 200degree,1 hour | The color change is lower than E=1.5 |
Solvent resistance | MEK24 hours soaked in solvent-free | Without air bubbles, the surface without damage |
Uvioresistant | QUV-313,500 hours | Gloss higher than 80% lower than the Munsell color change level |
Water tolerance of | 2 hours | No bubble, not falling, losing light |
We offer free samples to you.
You can contact me informatoin as follows,
Attn:Danae