One Component Spray Tank Polyurethane Foam Insulation

China One Component Spray Tank Polyurethane Foam Insulation, Find details about China Polyurethane Foam, Polyurethane Foam Insulation from One Component Spray Tank Polyurethane Foam Insulation

Model NO.
DM_PU02
Main Agent Composition
Polyurethane Elastomer
Characteristic
Weatherability
Promoter Composition
Filler
Composition
Organic Material
Color
White
OEM
Yes
Logo Printing
Yes
Trademark
DM
Transport Package
Cartons
Specification
750ml
Origin
Shandong, China
HS Code
3214109000
Model NO.
DM_PU02
Main Agent Composition
Polyurethane Elastomer
Characteristic
Weatherability
Promoter Composition
Filler
Composition
Organic Material
Color
White
OEM
Yes
Logo Printing
Yes
Trademark
DM
Transport Package
Cartons
Specification
750ml
Origin
Shandong, China
HS Code
3214109000
One Component Spray Tank Polyurethane Foam Insulation

DM PU Foam Multy Purpose


It is a one-component, moisture-curing, multi-purpose polyurethane foam filled elastic sealing material. Polyurethane foam sealant is a special polyurethane product in which a polyurethane prepolymer, a foaming agent, a catalyst and the like are filled in a pressure resistant aerosol can.
During the construction, the aerosol-like colloid is sprayed to the part to be applied through a matching gun or a manual nozzle to complete the molding, foaming, bonding and sealing processes in a short period of time. The cured foamed elastomer has excellent properties such as bonding, waterproofing, heat expansion and contraction, heat insulation, sound insulation and even flame retardant (limited to flame retardant type), and is widely used for building door and window seams, component expansion joints and filling of holes, seal.

1. One component Polyurethane Foam.

2. Moisture curing.

3. Surface dry fast.

4. High-foaming

5. Anti-shrinkage

6. Strong bonding.
One Component Spray Tank Polyurethane Foam Insulation


PU FOAM PU2 uses a fluorine-free foaming agent that does not destroy the ozone layer. Generally, the dry time is within 10 minutes (at room temperature 20 °C). The dry time varies with ambient temperature and humidity. Generally, it is dry in summer quickly and the time is about 4-6 hours, while usually it takes 24 hours or more to get dry all around zero in winter. Under normal conditions of use (and in the case of a coating on the outside), it is estimated that the service life is not less than ten years, and the cured foam maintains good elasticity and bonding in the temperature range of -10 ° C to 80 ° C. force.
 
Application Instruction
1. Remove the dirt and grease on the surface of the substrate, and spray the area to be filled with a little water mist.
2. It is used in the temperature range of 0 °C ~ 40 °C. If it is used in the cold season, in order to ensure the use effect, it is recommended to preheat the tank in a 30 °C environment.
3. Shake vigorously for up to one minute before and after construction. Keep the tank in an inverted state during construction.
4. After the construction of each tank is completed, please clean the threaded part of the glue gun with special cleaning agent. After each continuous construction, please clean the whole gun and tube with special cleaning agent, to avoid cured blockage.
5. Repair and cutting should be carried out after the foam is fully cured. Attention: to cut the foamed skin will reduce the foam strength and reduce the sealing and waterproofing effect of the foam.
6. This product is not resistant to UV rays. It is recommended to cover and coat further.

TDS
QualityMedium
BasePolyurethane
Curing SystemMoisture curing
Tack Free Time(min)5~10
Cutting Time(h)1~2
Hardness  (Shore A)23
Expansion times40
Density(kg/m3)23
Temperature Resistance-30~80ºC
ColorWhite/ Light Yellow
Fire Class (DIN 4102 )B3
Dimensional stability size stability (23±2)ºC,48h, %<=5
Tensile Strength(kpa) (aluminum plate, 7days)57.6
Shear Strength (kpa) (aluminum plate, 7days)150
Sinking behavior (alluminum alloy)1-4cm non sink, 5cm total sink
*** The above data is based on experiments results at 23ºC, 50% humidity.
 
  1. Packaging details.
750ml/900gram/tank
12pcs/CTN 

Storage
Shelf life(18~25ºC) is 12 months. 
One Component Spray Tank Polyurethane Foam Insulation

Packaging
750ml.(26.5FL.oz) volume.
One Component Spray Tank Polyurethane Foam Insulation
One Component Spray Tank Polyurethane Foam Insulation
Customer Question & Answer


Could you provide OEM service?

Yes, OEM service is available. You can contact us by e-mail, tel, skype, whatsapp, facebook etc.


Could you provide a complete solution for the products which are in selling?

Yes, as a professional manufacturer of sealants for bonding and sealing, it is our pleasure to make customized solution on your requirement on your product.


What is the delivery time for sample and purchased order?

At normal condition, the delivery time is 2-10 days for samples, 15-20 days for purchase order.


Can we get a sample ?

Yes, we understand that you need sample for testing. So we can provide 1-2 units free of charge.
One Component Spray Tank Polyurethane Foam Insulation



One Component Spray Tank Polyurethane Foam Insulation

Contact Information

MP:     0086-132 1008 3810
Tel:     0086-532-8878 1015
Web:   dm-adhesive.en.made-in-china.com