Products

Electronic Encapsulating Emastomer/ RTV2 Silicone Elastomer

China Electronic Encapsulating Emastomer/ RTV2 Silicone Elastomer, Find details about China Silicone Rubber, Silicone Compound from Electronic Encapsulating Emastomer/ RTV2 Silicone Elastomer

Model NO.
RTV160 silicone
Working Time
30 Mins
Curing Time
24 Hours
Hardness
55-60 Shore a
Dielectric Strength
20
Volume Resistivity
3×1015
Thermal Conductivity
0.58
Trademark
MC SILICONE
Transport Package
20kg/Drum, 25kg/Drum or 200kg/Drum
Specification
REACH, MSDS, SGS
Origin
Dongguan, China
HS Code
39100000
Model NO.
RTV160 silicone
Working Time
30 Mins
Curing Time
24 Hours
Hardness
55-60 Shore a
Dielectric Strength
20
Volume Resistivity
3×1015
Thermal Conductivity
0.58
Trademark
MC SILICONE
Transport Package
20kg/Drum, 25kg/Drum or 200kg/Drum
Specification
REACH, MSDS, SGS
Origin
Dongguan, China
HS Code
39100000
Electronic Encapsulating Emastomer/RTV2 Silicone Elastomer

Product Description 
RTV160 is a two-component room temperature cure potting compound with mix ratio of 1:1, curing time can be accelerated by heating up, features with good flow ability and flame resistance. It's suitable for encapsulating of LED displayers, power module and electronics components, etc.
 
Product Features
 
Easy mix with 1:1 proportion
Low viscosity, good flow ability
Room temperature cure or heat up cure
Thermal conduction, flame resistance
Without solvent
 
Technical datasheet 

Item No.
RTV160

Before curing

Appearance
A: brick red B: transparent

Viscosity (mPa.s 25°C)
3000~6000

Density (g/cm3 )
1.57±0.02

Working life (min 25°C)
30

Curing time (hrs)
24

Heat-up at 100°C (min)
10

After curing

Hardness (shore A)
50~60

Dielectric breakdown voltage kv/mm 25°C
≥20

Volume resistivity ohm*cm
1*1015

Tensile Strength Mpa
≥0.6

Thermal conductivity cm/°C
0.525*10-3

Working temperature  °C
-30~200
Note: Mechanical and electrical performance data tested at 25°C 7 days after curing, relative humidity of 55%; all the tested data is average value.
  
Using Instruction
1. Preparing: clean up the coating surface, remove the rust, dust, oil dirt.
2. Pouring: weigh the silicone and catalyst correctly, mix silicone part A and part B thoroughly, pour onto the electronic components/surface after vacuum degassing.
3. Curing: room temperature cure or heat-up cure is both workable.
 It should be use up after open the package, the material must be kept in a cool place sealed well, and it should avoid from contactwithmoisture in the air. 

Packaging & Shipping
Packs are available in 20kg and 200kg per drum.
A pallet can contain 24 drums of 20kg/drum or 4 drums of 200kg/drum.
 
Storage & Shelf life 
Keep it from strong sunshine, heat, and store in cool & dry place, well sealed. It has a shelf life of 12 months.
It can be stroked and transported as non-dangerous goods.
 
Company Information
We are manufacturer, and specialized in manufacturing different hardness, different viscosity silicone rubber series, we are competitive in price with good quality.
 

 

You Might Also Like