Exterior/External Electrostatic Spray Silver Vein Powder Coating Paint

Introduction
antique finish powder coatings with highly decorative finishes consisting of a base color with a vein pattern of a distinctly different color.The base color is usually black,white or other colors.The vein pattern could be metallic(silver,gold or copper).To preserve its decorative appearance,clear topcoat is highly recommended for indoor or outdoor use.

Used:
Powder coating should be sprayed on metal products by electrostatic gun & curing in oven or line.

Advantage:
Our silver vein texture powder coating paint is bonded/bonding texture powder,have good quality and stability on charecters.

Sales quantity:
We export about 300tons silver vein texture powder coating paint.

Application:
Mostly used for metal door(Security door)

Using method

1. pplied by electrostatic spraying gun that can provide negative tension of 60-80 kV.
2. uring schedule : 180-200ºC /10-15 minutes depending on the powder chemistry.
3. Optimal film thickness : 80 -110 um 

1. Ferrous metals(cold rolled steel, cast iron etc.): Iron or zinc phosphatation
2. Zinc surfaces(galvanized steel, zinc alloy) : Chromatation or zinc phosphatation
3.  alloys : Chromatation

• RAL colors coating powder
• Pantone colors
• Color-matching regarding customer requirement is available

GENERAL TYPES

• Polyester /Hybrid powder coating
• Epoxy Powder coating color
• Metallic powder coating color
• Hammer tone color powder coating
• Texture color powder coating powder

Textures include sand grain, hammer, silk pattern, sand textured, marble,metallic, multi-color.

PHYSICAL PROPERTIES

• Specific gravity :1.2 ~ 1.8g/cm3 up to colors
• Particle size distribution:100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)
• Level of liquidity:24 ~ 27 mm

CURING CONDITIONS

180 °C ~ 200 °C (work piece temperature), 10-15 minutes

AVERAGE COVERAGE

8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)

PACKING

Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.

STORAGE AND TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used.

HEALTH AND SAFETY

Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating

We offer free samples to you.

You can contact me informatoin as follows,
Attn:Danae