These printable heat transfer materials are designed for solvent inks using a print/cut system. Printable Heat Transfer Vinyl enable you to produce full color digital transfers for application on a wide variety of fabrics. Compatible with Roland®, Mutoh, Mimaki, and other solvent print/cut systems.

Printable Heat Transfer Vinyl is our Easiest Weeding and Masking Print and Cut Material! To say that Livinyl™ is a breeze to weed is an understatement! Livinyl is hands down the easiest weeding print and cut material ever! Simply print and cut your design, weed the excess with ease, and mask. You say you hate masking because of all the pressure you have to apply to get the design to transfer to the mask? Forget about it! Livinyl doesn't even require a squeegee! Simply lay your design onto the mask - and swipe firmly with the palm of your hand to adhere. It doesn't get any easier than that! Peeling the carrier is a snap too. Livinyl applies at only 300° F, which gives you the ability to apply to special materials that require a lower application temperature.

SPECIFICATIONS:

• PU composition
• Polyester Backing
• White Base
• Semigloss Finish
• 80 Microns / 3.1 Mils
• 45°/60° Blade

INK RECOMMENDATION:

• Compatible with Eco-Solvent, Solvent, and Latex based Printer/Cutters

APPLIES TO:

• 100% cotton
• 100% polyester
• Poly/cotton blends

HEAT APPLICATION:

• Preheat: 2-3 Seconds
• Temperature: 300° F / 149° C
• Pressure: Medium
• Time: 15 Seconds
• Peel: WARM

CARE INSTRUCTIONS:

• Do not dry clean
• Machine wash WARM / mild detergent
• Dry on normal setting
• No chlorine bleach
• Wait 24 hours before first wash