Stainless Steel Motorized Hydrotherapy Water Treadmill Dog Treadmill

What is the application of our Dog hydrotherapy treadmill?
Dog underwater treadmill is a great option to keep your dogs healthy and active,it also can help rehabilitate dogs recover from injury.

What is the detail of our dog water treadmill?

What is the using instruction of our underwater treadmill?
1.brief introduction
Product must be used according to the instruction manual
Treadmill parameters: speed
Sports parameters: distance, calories, time, speed

2.Display Windows
LCD Display the following functions
1. Speed 2.Time 3.Distance 4.Calories

3.Button
The treadmill also has another button board, except the main board.
1. Start button
2. Stop/ restart button
3. Program button
4. Model button
5. Speed+
6. Speed -
7. Left Button : Outer water
8. Right Button :Heating
9. Turn up :Outer water ;Turn down :Water cycle
10. Controller

Packing detals

What is the parameters of the speed?
Voltage: 220V
Lowest Speed: 0.8km/h
High Speed: 12.0km/h
Longest sports time in time model: 99mins
Shortest sports time in time model: 8mins
Longest distance in distance model: 99km
Shortest distance in distance model: 0.8km
Maximum calorie consumption in calorie model: 999cal

What is the sport mode?
All the sports model is based on the two premises of A: the treadmill is plug the power cord ; B : the safety key is inserted
1. Manual
a. insert the safety lock, Windows display "0.0" ,enter " start/stop"; "speed" from the countdown 3 to 1, buzzer warning sound ,system boot up.
b. treadmill adjustment the speed as "speed+, speed-"
c. Treadmill count the sports parameters and display updating .
d: press the speed shortcut key adjust the speed directly, ,display number the same as key number.
e: press the "stop" to slow down, the treadmill stop.

2. Model
A. Enter:press "mode" the windows flashing display, prompt to choose "time, distance, calorie" model. Press "speed+, speed- " to adjust the amount of exerciser, press " start " to enter the mode, the system start
B. treadmill adjustment the speed as "speed+, speed-"