Characteristic

1.High temperature-resistance ceramic pellet igniter which can reach a permanent working tem-

 perature above 750°C

2.Energy saving, super fast heating-up

3.Air can through and around inside and outside of the heater.

Heat can be transfered from both inside and ouside of the heating element.

4.Electrically oxidation and corrosion-resistant

5.High load-bearing capacity(thermal shock resistance, cycles)

5.Customization the igniters according to customers' specific requirement.

Application

One special application area for Green Way's high temperature pellet igniter is in heating

systems that used solid fuels such as wood pellets as energy source. The challenge here is to

ignite the biomass in a very short time while retaining very low emission values. This can be

perfectly achieved by Green Way's hot surface ceramic pellet igniter.

Ceramic hot surface pellet igniter for pellet boilers need only approx. 1/10 of the energy of that

needed by hot air fans and ignition blowers. Their ignition capacity lies between 120 and 200 Watt.

Depending on the positioning of the ignition element in the boiler, the ignition time of approx. 60 s

econds is extremely short. This also means minimal emissions!

Mass customization is available.

~~~Kinds of Inspection before Goods Delivery~~~