is used to manufacture series of C and Z sections. The machine is mainly composed of uncoiler, flattening device, punching device, cutting equipment, roll forming machine, collection table, hydraulic station, and PLC control system, etc. It can produce 80 - 300mm wide C and Z purlins, height from 45 - 80mm. The raw material is cold rolled steel, galvanized steel, etc, material thickness is 1.5 - 3mm.

  
This equipment consists of six parts, namely uncoiling, forming, cutting, receiving, PLC control and hydraulic system.

The first part is generally divided into integral molding and split molding. The difference between the two is mainly in the aesthetics and price difference of the formed sheet. Split molding will increase the number of rows and rolls, so it occupies a larger area and the cost is higher, but the version will be more beautiful. Generally speaking, if our requirements for the version are not too high, overall molding is the first choice.
 

The next step is the cut-off part. This is generally two ways, electric and hydraulic. Electric is generally used in extreme weather, and hydraulic is more common. Hydraulic cutting has static cutting and servo tracking cutting, depending on the specific requirements. From the structure point of view, there are two forms of single guide post and double guide post. As the name implies, the stability of double guide post is stronger.
 

The next step is the cut-off part. This is generally two ways, electric and hydraulic. Electric is generally used in extreme weather, and hydraulic is more common. Hydraulic cutting has static cutting and servo tracking cutting, depending on the specific requirements. From the structure point of view, there are two forms of single guide post and double guide post. As the name implies, the stability of double guide post is stronger.
 

The hydraulic station control valve adopts large valves to prevent blockage. And it is equipped with an air-cooled system and is suitable for most areas.
 

Main products: Trapezoidal (IBR) roll forming machine , Glazed tile roll forming machine, Corrugated roll forming machine, Double layer roll forming machine, Ridge cap roll forming machine, Floor deck roll forming machine, C Z purlin roll forming machine, Keel roll forming machine, Roller shutter door roll forming machine, Highway Guardrail roll forming machine, Anti-condensation length machine.