XPC C Frame Double Crank Steel Frame Power Press (110ton-250ton)
Manufacturing Precision Standards : ISO/CE/Japanese JIS 1 Class
Video Link:
https://xuzhoupress.en.made-in-china.com
https://xuzhoupress.en.made-in-china.com
https://xuzhoupress.en.made-in-china.com
https://xuzhoupress.en.made-in-china.com
1. Parameters
| Name | Unit | XPC-110 | XPC-160 | XPC-200 | XPC-250 |
|
| Model | | V | H | V | H | V | H | V | H |
| Capacity | Ton | 110 | 160 | 200 | 250 |
| Rated tonnage point | mm | 5 | 3 | 6 | 3 | 6 | 3 | 7 | 3.5 |
| Stroke | mm | 180 | 110 | 200 | 130 | 250 | 150 | 280 | 170 |
| Stable speed | s.p.m | 35-65 | 50-100 | 30-55 | 40-85 | 25-45 | 35-70 | 20-35 | 30-60 |
| Die height | mm | 400 | 435 | 450 | 485 | 500 | 550 | 550 | 605 |
| Slide adjustment | mm | 100 | 100 | 120 | 120 |
| Bolster area | mm | 1800 x 650 x 130 | 2000 x 760 x 150 | 2400 x 340 x 170 | 2700 x 900 x 170 |
| Slide area | mm | 1400 x 500 x 70 | 1600 x 550 x 70 | 1850 x 650 x 95 | 2100 x 700 x 95 |
| Main motor | kwxP | 11 x 4 | 15 x 4 | 18.5 x 4 | 22 x 4 |
| Presses weight | Ton | 14.2 | 20 | 27.5 | 45.5 |
| Air pressure | kg/cm2 | 5 | 5 | 5 | 5 |
| Presses precision | | JIS(CNS) I class |
| Die cushion capacity | | Two plate Double cylinders |
| Capacity | Ton | 3.6 x 2 | 6.3 x 2 | 10 x 2 | 14 x 2 |
| Air pressure | kg/cm2 | 6 | 6 | 6 | 6 |
| Stroke | mm | 70 | 70 | 80 | 100 |
| Die cushion work part dimension | mm2 | 350 x 235 x 2 Group | 410 x 260 x 2 Group | 540 x 350 x 2 Group | 640 x 470 x 2 Group |
2. Technical Descriptions :
Product Features:
* With high rigidity rack design, they are welded with the use of high-quality steel plates, through relieving of internal stresses, so that stability and reliability of the whole machine in precision are enhanced.
* Machine adopts high-alloy-steel, two-bent-axle, and two- wide work center, to optimize design.
* In order to guarantee relative stationarity of machine operation, it is necessary to equip with two balancers.
* Moulding-adjustment precision is as high as 0.1 mm, safe, speedy, and reliable.
* Through hard oxidation and grinding, such parts as bent axles, gear sets, and connecting rods possess higher combination property and tolerance.
* Adopt highly sensitive and reliable clutch/brake and internationally top duplex magnetic valve, as well as overload protection devices, to guarantee precision and safety for operation and stop of press rams.
* Machine's structural design shall be reasonable, for the convenience of realizing automatic production, reducing cost, and improving efficiency.
* Possess advanced design concepts, low noise, low consumption, and energy saving.
Standard Configuration:
* Dry clutch brake
* Standard operating system
* Operation Choice/cutting/inch stroke /safe journey/continuation of operating mode
* Oil pressure overload protection device
* Over-run safety device
* Duplex magnetic valve
* Misfeed detection consent
* Electric slider adjusting device
* Digital moulding-height indicator (unit: 0.1 mm)
* Electric butter lubricating device
* Accumulative counter (6 digits)
* Pre-determined counter (6 digits)
* Maintenance counter (6 digits)
* Life counter (6 digits)
* Electronic rotatry cam switch (6 connections)
* Air-blast device 1/2" primary circuit
* Air source connector 1/2" secondary circuit
* Error inspection socket
* Power socket (only apply to single-phase 110V power)
Optional Configuration:
* Wet clutch brake
* Die cushion device
* Vs variable-speed motor
* Touch-screen device
* Photo-electric safety device
* Knock-out Device of ram
* Main motor inversion device
* Foot switch
* Safety dog and safety latch
* T-type two-hand button operating platform
* Inspection variable-connection magnetic valve
* Anti-vibration mechanical foot
* Rapid tooling exchange
* Upper die clamper
* Lower die clamper
* Die lifter
* Mould-shift arm
* Basic bolt and soleplate
* Automatic feeder device
* Three-in-one NC straightening feeder
* NC Roll feeder
* Two-in-one feeder and straightening machine
* Leveller